Instructions / Assembly

34
ASSEMBLY
While holding the shoe against the
rim, tighten the shoe fixing nut.
3
Adjust the balance with the spring
tension adjustment screws.
5
Depress the brake lever about 10 times as
far as the grip to check that everything is
operating correctly and that the shoe
clearance is correct before using the brakes.
6
Pass the inner cable through the inner
cable lead. Set the cable with a clearance
of 1mm between each brake pad and the
rim, tighten the cable fixing bolt.
4
5 mm Allen key
5 mm Allen key
1mm 1mm
1 mm
Spring tension
adjustment screw
Spring tension
adjustment screw
Depress about
10 times
1 mm 1 mm
shoe fixing nut