User Guide

Quick Start Guide
HUB Settings
After connecting the two systems with the network cable, configure each HUB Base’s basic settings as
Master or Slave device. Generally, the first system is set as Master Device, and the second one as Slave
Device.
In this case, you need to turn OFF the “Obtain IP address automatically” under “Network” settings on both
the HUB Bases.
HUB Display Interfaces
Enter Network menu, and set the
Obtain IP address automatically to OFF
Ente r Master and Slave me nu,
and se lect Master Device 
HUB ❶
Netw ork
Sett ings
HUB❷
Ente r Network menu, and s et the
Obt ain IP address automatically to OFF
Enter Master and Slave menu,
and select Slave Device
Netw ork
Sett ings
Tap Sca n to enter. The sc reen wil l
disp lay the Master Device s IP address.
Use th e Arro w Key to locate the IP
address, a nd press C onfirm.
11
Three Systems Cascade via IP Network
Cascade Connection Method
When cascading three systems, it is recommended to use the IP network connection. Set the first system's
HUB to Master Device and the second and third HUBs to Slave Device.
Netw ork cable Netw ork cable