LARK 150 User Manual V1.0.
Specific FOREWORD Thank you for purchasing Hollyland LARK 150 wireless microphone. Please read this instruction carefully before using the product. Wish you have a pleasant experience. KEY FEATURES ⚫ 5ms Latency with up to 320ft Range ⚫ 2 TX & 1 RX Combo ⚫ 2.
① Charging Case X1 ② Transmitter X2 ③ Receiver X1 ④ Furry Windshield X2 ⑤ 3.5mm TRS Cable X1 ⑥ USB Type-A to Type-C Cable X1 ⑦ Lavalier Microphone X2 ⑧ User Guide X1 The exact quantity may vary on products configuration. Please take the actual quantity as standard.
B：RECEIVER ① Link Indicator (Left Channel） ② Display Screen ③ Link Indicator(Right Channel） ④ Volume Knob（Left Channel）:Adjust the Volume of the Left TX /Recording Mode Switch Button: Press to Switch the Recording Mode /Left TX Mute Button: Click to Mute the Left TX ⑤ Volume Knob (Right Channel): Adjust the Volume of the Right TX /Channel Switch Mode: Press to Switch the Channel when Stereo Mode /Right TX Mute Button: Click to Mute the Right TX ⑥ Power Button (Press for 3s to Switch On/Off) ⑦ 3
C：CHARGING CASE ① Power Indicator（Red: Low Battery, Green: Safe Battery Status, Orange: Charging） ② USB Type-C Port for Charging ③ Reset Button ④ TX Charging Slot ⑤ RX Charging Slot ⑥ TX Charging Slot PRODUCT INSTALLATION
① Press Power Button of TX/RX for 3s to switch on. ② Install TX as Figure2. ③ Install RX on the Camera. ④ Connect the 3.5mm Audio output port of RX with 3.5mm Audio input port of the camera by 3.5mm TRS cable.
② RX Battery Status ③ Cyan TX Signal Strength Status ④ Cyan TX Battery Status ⑤ Cyan TX Input Volume Status ⑥ Blue TX Battery Status ⑦ Blue TX Signal Strength Status ⑧ Blue TX Input Volume Status The TX color displayed on main display screen of RX relates to the channel switch and recording mode, the indicators of RX represents the corresponding TX B：DISPLAY OF RX CHARGING CASE ① Identification of Charging Case ② Charging Case Battery Status (Orange: Charging, Green: Full-Charged) ③ Left
1. Put TX and RX into the charging case at the same time, the unpaired devices will be paired automatically. 2. Display “√” when pair successfully. 3. Display “X” when pair failed. ② CHARGING 1. It means low battery when the power indicator or the battery icon of RX display screen is red. 2. TX and RX will be charged when placed into charging case. 3. The indicator of TX will display orange when charging.
④ Safety Track Mode 1. After taking out, start up and successfully paired TX and RX. 2. Long press left button for 3s to recording mode. Switch successful when the screen displayed “ST”. 3. At this time RX switched to ST mode, both left and right channels output two audios of TX, but the sound of right channel is 6dB less than left channel, in order to make sure one of the channels is in the safe output volume. 4. Volume of TX corresponds the indicator could be adjustable at this time by the knob.
PARAMETERS TX： 3.5mm Audio Input Port RX： 3.5 mm TRS Output Interface Charging/Upgrading Contacts Interfaces 3.5mm Headset Interface Charging/Upgrading Contacts Charging Case： Frequency Bandwidth Built-In Mic Lavalier Mic USB Type-C Interface 2.
(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
