Product Information

9
HDMI Loop Out (Type A Female)
2 Antenna Interfaces (RP-SMA
Male)
DC Input, Type-C USB;
HDMI Output 2 (Type A Female)
2 Antenna Interfaces (RP-SMA Male)
DC Input, Type-C USB;
Supply Power
Range
6~16V DC
6~16V DC
Power
Consumption
<10W
<6W
Net Weight
165g
165g
Size
（LxWxH）: 110*62*28mm
External antennas and battery plate
excluded
（LxWxH）: 110*62*28mm
External antennas and battery plate
excluded
Input Video
Format
HDMI:
480P60,576P50,720P50/60,
1080i50/60,1080P30/50/60
/
Output Video
Format
/
HDMI:
480P60,576P50,720P50/60,
1080i50/60,1080P30/50/60
Frequency
5GHz
5GHz
Modulation Mode
OFDM
OFDM
Transmission
Power
Maximum 21dBm
/
Receiver
Sensitivity
/
-80dBm
Transmission
Latency
Less than 0.1s
Bandwidth
20MHz
20MHz
FAQ
 ConnectionIssues
1. Please check and make surethe power suppliesfunction well ofthe transmitter and receiver.
2. If the battery indication showsat itslow battery, please replace the battery in time.
3. Please try to change to another channel andconnectthe devices again.
4. Please re-pair the devices.
5. Please check if the antennasonthe transmitter and receiver arecorrectlyinstalled.
 Display Issues
1. Please check if the video source is correctly connected with the HDMI IN interface.
2. Please check if the trans mitter shows a video format.If not, please check if the HDMI cable is
connected with transmitter and camera successfully and if there is a video output from camera.
3. Please check if the camera output video format is compatible with this device.
 Image Low Quality Issues
1. Please set “SCENE MODE” to “IMAGE MODE”.
2. Please check HDMI (IN/OUT) cable is stably connected.
3. Please make surethe transmitter and receiver are installedat least 1.5m above the ground.
4. Please check the signal strength status. If it is with only 1 bar signal, it means that the signal strength is
veryweak. In this case, please change the channel or shorten the device distance.