User's Manual

OPERATING GUIDENCE
1.After taking out, start up and successfully paired TX and RX.
2.Long press left button for 3s to recording mode. Switch successful when the screen
displayed “Mono”.
3.At this time RX switched to mono mode, both left and right channel outputs two
audios of TX.
4.Volume of TX corresponds the indicator could be adjustable at this time by knob.
③
Mono Mode
1.After taking out, start up and successfully paired TX and RX.
2.Long press left button for 3s to recording mode. Switch successful when the screen
displayed “ST”.
3.At this time RX switched to ST mode, both left and right channels output two audios
of TX, but the sound of right channel is 6dB less than left channel, in order to make
sure one of the channels is in the safe output volume.
4.Volume of TX corresponds the indicator could be adjustable at this time by the knob.
④
Safety Track Mode
1.After taking out, start up and successfully paired TX and RX.
2.Long press left button for 3s to recording mode. Switch successful when the screen
displayed “Stereo”.
3.At this time RX switched to Stereo mode. Left side of display screen corresponds to
left channel output, right side of display screen corresponds to right channel output.
4.Left knob controls output volume of left TX which corresponds left channel, right
knob controls output volume of right TX which corresponds right channel.
5.Long press right button for 3s can exchange left and right channels' output and the
TX info displayed on the main screen. The original TX on the left will be displayed on
the right, the volume knob control will also be exchanged.
⑤
Stereo Mode
10