Tus neeg siv phau ntawv

Thank you for choosing our product. This product is a
smart wireless microphone that provides profession-
al-level recording output. Right now Plug and play, no
APP is required.
Multiple uses: webcast, Vlog shooting Filming, program
interviews, interview recordings, video teaching, and
other occasions.
方框内不包含出血尺寸
骑马钉 书写纸
Step 1：
Plug the receiver into your
device and you'll see a flashing
red light.
1. Put the microphone transmitter into the fully
charged microphone charging case to charge.
2. Or connect the microphone transmitter with the
USB cable for charging
3. When charging, the front red light on the
microphone will be on and will go off when it is
fully charged.
The receiver itself has no need to be charged, but you
can charge your smartphone through the receiver
while you are recording and the mobile phone is in
When the receiver is plugged into the mobile phone and
there is poor contact, it may be caused by dirt and dust
on the receiver plug. At this time, please use the cleaning
eraser we provided to clean the receiver plug.
1. This device does not have a power adapter. When
charging is required, please use a power adapter that
has obtained the CCC certificate and complies with
relevant standards.
2. Please use this equipment within the temperature range
of 0°C-40°C, and store the equipment and accessories
within the temperature range of-20°Cto +45°C. When the
ambient temperature is too high or too low, it may cause
equipment failure.
3. Do not expose the device to high temperatures or around
heating devices, such as sunlight, heaters, microwave
ovens, ovens or water heaters, etc.
4. When charging is complete or not charging, please
disconnect the charger from the device and unplug the
charger from the power.
5. The device is equipped with a non-removable built-in
battery, please do not replace the battery yourself to
avoid damage to the device.
6. Please dispose of this equipment, batteries, and related
accessories following local regulations, and do not
dispose of them as domestic waste.
Q: Does this mic require video recording on the phone, or can
I use it for audio only through a different app?
A: This microphone works with the apps like a recorder, and
camera on phone. It also works with apps TikTok,
YouTube, and Facebook for video.
Q: How about the sound quality of this wireless microphone?
A: Wireless microphone uses an upgraded noise cancellation
chip, designed to provide you with clearer audio.
Q: Can two microphones be used at the same time?
A: Yes, two microphones can be used simultaneously.
Q: Is the noise canceling mode turned on automatically?
A: Yes, the wireless microphone's noise-canceling function
is enabled by default. Upon removing the microphone
from the charging case, it will automatically power on with
noise-canceling activated.
If in a quiet indoor environment, you may press the
multi-function button once to disable the noise reduction
function.
1. Please make sure your device is unlocked and the red
light is always on after the receiver is plugged into your
smartphone.
2. Press the power switch of the microphone for about 1
second to turn it on. If the red light for the receiver and
blue light for transmitter always keeps on, it means they
are paired successfully.
3. To ensure sound quality, please put the microphone at a
proper distance and do not put it too close to your
mouth. If you want to hold the microphone in your hand,
please hold the bottom of it and do not cover the
windbreak on the top.
5. Any time when you see the red light & blue light flash
alternately, it means the connection is failed and you
need to restart.
6. Press and hold the power switch for about 3 seconds to
power off the microphone.
Technical specifications
Product Weight:
Product Material:
Headphone Monitoring:
Reverberation:
Transmission Distance:
One for Two:
Noise Cancellation:
Sound Delay:
Microphone:
SNR:
Battery Life:
Transmitter Battery Capacity:
Rechargeable Case Battery Capacity:
Adapter:
68.5g
ABS+PC
Support
Support
20m/65ft
1 Receiver with 2 microphones
Support 3rd Level Noise Cancellation
≤25ms
-38dB±3dB Omnidirectional
≥70dB
6~7H
80mAh
600mAh
5V/1A
Step 2：
Take out the microphone, the
microphone will automatically
power on, and the indicator
light will be red and blue flash
alternately.
Step 3：
If the red light for the receiver
and blue light for transmitter
always keeps on, it means they
are paired successfully. Then
open the phone camera, live
app, or other apps to start
recording.
Outline Picture and Function Description
Indicator Light DescriptionInstructions
1. Microphone Transmitter
2. Microphone Receiver
3. Charging Case
4. Type-C Charging Cable
5. Cleaning Eraser
6. User's Manual
2pcs
1pcs
1pcs
1pcs
1pcs
1pcs
Package List
10. Transmitter digital display
11. Digital display of
charging case
9. TYPE-C charging port
1. Receiver lighting
charging port
4. Microphone clip
5. Type-C charging port
2. Receiver light
3. Receiver plug
7. Multi-function button
6. Microphone light
8. On/off button
low-power status. Just
plug the charging cable
of your phone into the
interface port of the
receiver, and the mobile
phone can be charged
through the interface.
Microphone transmitter
Receiver
Functional
status
Key operation
Lighting effect
Start up
Shutdown
Automatically
power on
Long press the
power button for 3S
Alternately flashing
red and blue lights
All lights off
Not
connected
Connected
Alternately flashing
red and blue lights
The blue light is always
on,the red light is off
Noise
reduction
switch
Reverber-
ation
Mute
Charge
The red light is
always on,
the blue light is off
All lights offFull charge
Low battery
The red light
flashes once for 3S
Opened by default,
click the
multi-function
button to open
Click the multi-function
button to close
Red light and blue
light are on at the
same time
Blue light on
red light off
Long press the
multi-function button
to turn on and off the
reverb
Flash red once
Double-click the
multi-function button MIC
to mute,
double-click again to
restore the radio state
Blue light flashes,
red light off
Functional
status
No button Lighting effect
Start up
Shutdown
Plug into phone
port to power on
Dial out the mobile
phone port to power off
Flashing red light
Not connected
Connected
Flashing red light
Steady red light
Frequently Questions & Answers
Please follow up on the user's manual step-by-step
and we will always stand by if you have any problems
while recording.
If you have any other questions, please contact us.
Activate Permanent After-sales Service: Permanent
replacement of damaged, defective, not upgraded,
or missing items.
Please activate via email below within 15 days.
Activation & Warranty
[e-mail]
Our Customer Service Email:
Special NoticeSafety informationCleaning Charging
For Microphone Transmitter：
For Receiver：
Product Description
M1 Wireless
Lavalier Microphone
Quick Operation Guide
User's Manual
Power button
red light is always on
1
2
4
5
6 7
8
9
11
10
3
01 02 03 04 05 06 07 08 09 10 11