User Manual

FAQ
1. Set “SCENE MODE” to “IMAGE MODE”.
2. Check if the HDMI/SDI IN or OUT cables are correctly connected.
3. Make sure both the transmitter and the receiver are installed at least 1.5m
above the ground.
4. Check the signal strength status. If it is with only 1 bar signal, it means that the
signal strength is very weak. In this case, change the channel or shorten the
distance between the devices.
1. Check the number of connected APP devices. When 1 transmitter is connected
with only 1 or none receiver, the system can still connect up to 4 App monitoring
devices; or 1 transmitter can connect with maximum 2 receivers and no APP
monitoring device.
L IMAGE LOW QUALITY ISSUES
L APP CONNECTION ISSUES
16