Owner manual

Step 6 B: Installing into a

2”

trailer hitch

Place lock washer and flat washer onto hitch pin

bolt as indicated. Insert the receiver tube into the

hitch. Align the holes, insert the hitch pin bolt

and tighten securely using a ¾” wrench.

Fig. 12

Fig. 13

Fig. 14

Fig. 15

Install Hitch pin clip

after tightening bolt

Important! When inserting the hitch pin

bolt, the bolt should pass through the

receiver tube first then through the

plastic spacer.

Folding Down Vertical Post

For easy access to the cargo area, the vertical post can

be folded down. To fold down vertical post, rotate and

remove the side-retaining pin as shown in Fig. 16a-16d.

Be sure to re-tighten the thumbscrew after replacing pin.

16c

16d

16b

16a