User's Manual
DFD-100 User Manual
- 6 -
④.
Power LED
Charging Status –
the green LED will
be turned on while charging. When
fully charged the green light will go
out.
※ Faces the right side of the driver
during use
⑤.
Power
Switch
Hold down for 3 seconds to switch
the DFD-100 on or off. Once the
device is switched on, it will beep
once and glow green for 10 seconds
to indicate that the device is now
running automatically.
⑥.
Status LED
Once the device is switched on the
LED will glow green for 10 seconds
to indicate that the device is in
detection mode.
※ Faces the left side of the driver
during use
⑦.
Mini USB
charging
socket
The mini-USB socket can be used to
connect to a power supply and
charge the device.