Operation Manual

HOLUX FunTrek 132
5
Power on and Positioning
First positioning
Please take the device out of the room, and turn on the device. Then enter into the satellite status page to
displays the position status. When searching satellite signal will display “Acquiring”. “2D Fixed” means the
positioning status mode. “3D fixed” means the coordinate information is available for reference.
Only after the positioning is successfully for the first time, it will begin to record the track.
General positioning
Once starts up, it will automatically do the positioning.
Satellite status page
Positioning precision
Positioning status
Satellite number
Satellite signal strength
WGS1984 coordinate value User define coordinates value
GPS signal's CN value
GPS measured Height
GPS Estimated Position Error
Average location
Cold start