Operation Manual

HOLUX FunTrek 132
18
View Map
With the map view, user can browse the tracks, waypoints, routes and areas. Following are the map features:
 Press the button to zoom in/out on the map.
 Adding marker on the map: Press the button to mark the location on the map. Press the button
again to locate the position in the middle of the screen which makes it easier to browse.
 Press the button to set the center of the screen position.
 If you have created your own map on the device, press button and select the map name, then you
can enter the map screen.
 Press the button to set the display including the three options: “North up”, “Front up” and “Course up”.
 North up: Maps of the northern part.
 Front up: Equipment for the Northern direction.
 Course up: Navigate direction up.
 The track will show following status:
 - the location is unknown.
 - the location is found and at idle state.
 - it is moving, and the direction of the movement is indicates by the direction of the arrow.
 - the starting point of the path or route, - the end of the track or route.
Note:
 Because of the metal will cause “compass interference”, the “Front up” function will not be worked when
the device was installed on bike stem or put in car.