Manualshelf

Operation Manual

ManualsBrandsHolux ManualsPersonal navigationFunTrek 132
12345678910
HOLUX FunTrek 132
iii
Product Caution
About operation environment
The operating temperature for the product is between -10℃~60℃.
Operating or recharging in an environment with a temperature over 45℃ might cause the system
malfunction. However, this should be considered a normal phenomenon. Please do not operate under
extreme temperatures.
About the altimeter
The device estimates altitude based on air pressure. Its means that altitude readings for the same location
may vary with air pressure changes.
The semiconductor pressure sensor used by the device for altitude measurements also is affected by
temperature. When taking altitude measurements, make sure the device is not subjected to temperature
changes.
Do not use this device for measuring altitude in applications that demand professional or industrial level
precision.
Do not rely upon this device for altitude measurements or perform button operations while sky diving,
hang gliding, or riding a gyrocopter where there is the chance of sudden altitude changes.
The air inside of a commercial aircraft is pressurized. Because of this, the readings produced by this
device will not match the altitude readings announced or indicated the flight crew.
Power safety precautions
Use the power adapter and USB cable that are included with the package. Using other power adapters or
USB cables than the one provided will result to malfunction and could proof to be dangerous.
The device should only be used with the supplied batteries.
About the power adapter
1. Do not use the power adapter in a wet environment. When hands and feet are wet, do not touch the power
adapter.
2. While using the power adaptor, ensure that the area is well ventilated. Do not let paper or other material
cover the power adaptor, as this will interfere with cooling. Do not use the power adaptor whilst it is in a
bag.
3. Do not attempt to repair the device. If device is damaged or is in a wet environment, replace the device
immediately.
4. It is not recommended to charge from a PC because the PC power voltage is not enough to supply the
device.