Operation Manual
HOLUX FunTrek 132
27
the inf file name should be "Software Name .0804." (in Simplified Chinese). If the third-party software
operating language is English, and FunTrek 132 main menu displays third-party software in Simplified
Chinese names. Then English is used for the third-party software operation. If the language ID number
and FunTrek 132 language does not match, an error will occur when running the third-party software.
0409 is 4-digit language ID that represents American English, 0804 represent Simplified Chinese, 0404
represents Traditional Chinese.
Training
Connect your FunTrek 132 with the follow ANT+ sensors: heart rate, bike cadence, bike speed and/ or
combined bike speed and cadence..
Note: Before you use the Training function, please do the positioning first.
Please do not power off the device when you operate “Training” function, the track log can’t be saved
normally.
Step:
On the main menu page, click “Application”.
First connect heart rate monitor, bike cadence and bike speed sensor. Details reference for Screen
When you touch the screen, you can adjust the screen calibration if there is a difference on the response
location.
Step:
On the main menu page, click Settings.
Select “Sensor” to enter the sensor settings menu.
Select “Screen”, a confirmation message will appear on the screen. Press the confirmation button, and
start to calibrate screen.
After calibrating the screen, tap the screen or wait for 30 seconds to exit.