Operation Manual

HOLUX FunTrek 132
28
 ANT+ Heart Rate Monitor, ANT+ Bike Cadence Sensor and ANT+ Bike Speed Sensors sections. After
connected, it starts to receive the data. Click “Training” button to enter the training page.
 “HR Grade”: Before you set the HR grade, please read the message that appears on the screen. Press
the button to enter HR Grade list and select the appropriate heart rate range.
 “Cadence Grade”: Before you set the Cadence grade, please read the message that appears on the
screen. Press the button to enter cadence grade list and select the appropriate cadence range.
 Users can define the cadence range. Click “User Define” to enter the minimum cadence value and press
the “confirmation” button. Next, enter the maximum cadence value and press the “confirmation” button to
save.
 “Training Time”: Enter the training time, and then press the “confirmation” button to save.
 Click “Last Training” to view the detail information of last training. It only displays the results of the recent
training. To view more information, press .
 “New Training”: Enter training page.
 The training information page displays heart rate, cadence rage, speed, and training time, etc.
Note: The heart rate or cadence which is currently lower than the preset minimum value is displayed in green,
higher than the preset maximum value is shown in red, and displayed in white within the default display.
The training information page is based on the connection situation, then display different status: