Manualshelf

Operation Manual

ManualsBrandsHolux ManualsPersonal navigationFunTrek 132
41424344454647484950
HOLUX FunTrek 132
42
Reposition
With reposition, you can use the current point to replace the original coordinates with the updated waypoints
coordinates.
Step:
On the main menu page, click the “Applications” icon to enter the Program menu.
Click the “Waypoints” icon.
Select the point that you will operate, click to enter the Waypoints menu.
Select “reposition” to update the waypoints coordinates to the current location coordinates.
When repositioning is completed, a message appears on the screen. Press the "confirm" button.
If GPS does not acquire the satellite signal, the device can not repositioning.
Average position
“Average position” calculates the average value of altitude the GPS sampling points and coordinates
information in order to obtain the accurate values on both altitude and coordinate information.
Step:
On the main menu page, click the “Applications” icon to enter the Program menu.
Click the “Waypoints” icon.
Select the point that you will operate, click to enter the Waypoints menu.
Select “Average position” to calculate current position and altitude.
When you have achieved the required sampling, press the
button to enter waypoint edit page. The