Operation Manual
HOLUX FunTrek 132
43
waypoints’ coordinates value are replaced with the average coordinates value.
On the edit page, press button to save the waypoint information.
Press the button to calibrate altimeter by average altitude.
On the Location map of 10 meters, 20 meters or 30 meters radius, when the sampling point is focused on the
center, the average coordinate value is closely paralleled the true value.
On the Altitude map, the height value is the horizontal axis, and the origin of the horizontal axis is the average
height. When the sampling point is achieved, the average altitude value is closely paralleled the true value (as
shown on the first illustration above). If the same circumstances, if there is a sudden altitude changes, the
altitude reading will be inaccurate. It is recommended to measure it again when the GPS signal and situation
are in better conditions.
Copy to new
Step:
On the main menu page, click the “Applications” icon to enter the Program menu.
Click the “Waypoints” icon.
Select the point that you will operate, click to enter the Waypoints menu.
Select “Copy a new” to enter the waypoint edit page. You can edit waypoint name,
select waypoint symbol, add notes, edit waypoint coordinates location, and enter
waypoint altitude. On “Coordinates input” page, press the button to set the
condinates format and system.
Press the button to save the new waypoints.
Project to new
“Project to new” is the origin to a waypoint, enter the distance and azimuth to create a new waypoint.
Step:
On the main menu page, click the “Applications” icon to enter the Program menu.
Click the “Waypoints” icon.
Select the point that you will operate, click to enter the Waypoints menu.