HOLUX M-1200E Bluetooth GPS Logger User’s Manual Bluetooth GPS Logger M-1200E User’s Guide Rev. 1.0 Technology, Inc. No.1-1, Innovation Road I, Science-based Industrial Park, HsinChu City 300, Taiwan TEL: 886-3-6687000 FAX: 886-3-6687111 Website: www.holux.
HOLUX M-1200E Bluetooth GPS Logger User’s Manual Table of Contents OVERVIEW .................................................................................................................................. 2 MAIN FEATURES .......................................................................................................................... 3 TECHNICAL SPECIFICATION ................................................................................................ 4 BASIC SPECIFICATION ....................
HOLUX M-1200E Bluetooth GPS Logger Manual Overview (Fig.1) The HOLUX M-1200E Wireless GPS Logger allows users to store of up to 200,000 GPS coordinates of latitude, longitude, time, and elevation. The data can be analyzed by uploading to a computer through its USB/Bluetooth connection. Once the coordinates and the digital images are integrated, the tracking history and the location the images were taken can be shared through ezTour or Google Earth. The HOLUX M-1200E Bluetooth GPS Logger (Fig.
HOLUX M-1200E Bluetooth GPS Logger Manual Main features Built in MTK MT3329 Low power consumption GPS chipset 66 parallel satellite-search channels for fast acquisition and reacquisition Superior sensitivity up to -165 dBm Built-in WAAS/EGNOS Demodulator without any additional hardware Compatible with Bluetooth Serial Port Profile (SPP) completely Low power consumption Rechargeable and changeable Lithium-ion battery Provide expand terminal contact to other system without Blue
HOLUX M-1200E Bluetooth GPS Logger Manual Technical Specification Basic Specification Chipset: MTK MT3329 chipset. Channels: 66 parallel satellite-search channels. Frequency: 1575.42 MHz Receiver: L1, C/A code. Built-in 4M Bytes flash memory capable of recording 200,000 points of GPS data Acquisition Time (refer to MTK chip specification) Reacquisition: 0.
HOLUX M-1200E Bluetooth GPS Logger Manual Output and Interface Output I. Output protocol Baud Rate: 38400 bps Data bit: 8 Parity: No Stop bit: 1 II. Format. NMEA0183 V3.01: GPGGA (1time/1 sec), GPGSA (1 time/5 sec.), GPGSV (1time /5 sec.), GPRMC (1time /1 sec.), GPVTG (1 time/1 sec), (GLL, or MTK NMEA Command for optional). III. Datum: WGS84. Input/ Output Interface: I. Compatible Bluetooth Serial Port Profile (SPP), Version1.2 and class 2(up to 10 meter range). II. In/Out Port.
HOLUX M-1200E Bluetooth GPS Logger Manual Getting Started 1. Charge Battery Please charge battery till LED off for the first time. Power cable plug in Power cable connect to power socket ↓ Charge Battery Battery indicator light: Mini USB socket Power too low -------- Red LED on Charging -------------- Green LED on Full or Not in charging -- LED off 2.
HOLUX M-1200E Bluetooth GPS Logger Manual GPS Status Put M-1200E in clear view of the sky without any obstruction for better satellite acquiring. Turn on M-1200E power ↓ ↓ Steady orange Search GPS -LED on ↓ Orange Position Fixed -LED blinking 3. Turn off M-1200E power Power Off -- Orange LED off GPS Status POI Status Press the POI button once, the POI yellow LED is on. Release the button, the yellow LED is off. It means the POI record is completed.
HOLUX M-1200E Bluetooth GPS Logger Manual 2). LED status: SYMBOL COLOR STATUS DESCRIPTION 1 time / 1 sec Search Bluetooth Device Blue Bluetooth/ POI Yellow Red Battery GPS Blinking 1 time / 1 sec Standby Mode 1 time / 3 sec Transferring Data Record the POI data Light on Press POI button Release POI button Light off Light on Power too low Green Light on N/A Orange POI record is completed.
HOLUX M-1200E Bluetooth GPS Logger Manual M-1200E Logger Track Logging and Mode Setting 5.2.1 Data Logging 1. When the power is turned on, the device will automatically search for satellite positioning (orange LED on), and then logging will begin. When the power is switched off, the logging will stop. When the power is turned on again, it will once again conduct satellite positioning and start logging. 5.2.2 GPS Data Logging Mode Setting 1.
HOLUX M-1200E Bluetooth GPS Logger Manual 3. From the Menu bar select [Setup GPS Logger] to bring up the settings window 4. Make sure that the M-1200E is connected to a PC or notebook, and select [reconnect] or [manual settings] 5. The logger can be set to record by a set time or set distance. The conditions for recording can be set the following ways: (1) Select car, bicycle, exercising, or walking mode. 6.
HOLUX M-1200E Bluetooth GPS Logger Manual the data from the beginning. (2) Terminate: When the data is full, the logger will cease to record any further data. 7. Press [Confirm] to start logging according to the new setting. 5.2.3 Data Read When the logger M-1200E is connected to a PC or notebook through USB or Bluetooth, the data can be extracted through ezTour. Please see ezTour instruction manual for details.
HOLUX M-1200E Bluetooth GPS Logger Manual Installation of Mini GPS Viewer program We provide a program “Mini GPS viewer.exe” for end user to watch the satellite signal receiving status on laptop or PDA device. For Windows 2000/XP OS, you can execute “Mini GPS viewer_PC” directly. For Microsoft Pocket PC, please copy “Mini GPS viewer_PPC” to SD card or device, then execute “Mini GPS viewer_PPC”.
HOLUX M-1200E Bluetooth GPS Logger Manual (Fig. 6) 3) In “setup” panel you can see “Hot Start”、“Warm Start”、“Cold Start”、which allow you to re-acquisition of Ephemeris and Almanac. Basically the satellites are always moving in the sky, if Ephemeris and Almanac data in GPS Logger can’t meet real satellites status upon you if GPS Logger is over 0.5 hour power off but you are no longer in the previous position , it takes more time for the GPS Logger to get GPS position fix soon.
HOLUX M-1200E Bluetooth GPS Logger Manual I. II. III. IV. Click menu, select → , then enter→ After entering , and select . Select . Find the < Connector (COM & LPT)> and check the Virtual COM Port, which was created by the USB driver. Please note that the virtual COM port number might be different from every computer.
HOLUX M-1200E Bluetooth GPS Logger Manual Appendix A. Troubleshooting Problems Possible Reasons Methods Using ezTour to connect Turn on the M-1200E power switch, and M-1200E power is not turned on. make sure GPS Orange LED is on. Please M-1200E is fail reference 7.3. Power On/Off M-1200E. Execute fail Can not open the COM port Can not find M-1200E Re-Start PDA or PC and refer to Appendix C Bluetooth function unstable “Bluetooth Device Connection” to re-connect.
HOLUX M-1200E Bluetooth GPS Logger Manual Appendix B. Power Jack & Data Port Jack type: Mating face of 5 pin Mini USB Type B female. Pin definition see table 1. 5 1 Table 1 Pin Pin Name Signal and description 1 GND 2 NC 3 D_Plus USB data transfer.(Voltage Level is 3.3V ~ 5.0V). 4 D_Minus USB data transfer.(Voltage level is 3.3V ~ 5.0V). 5 Positive terminal of DC adaptor that powers the internal VCHARG charging circuit of Li-Ion battery. The approved power supply is 5.0V +/- 0.
HOLUX M-1200E Bluetooth GPS Logger Manual Appendix C. Bluetooth Devices Connection The following is the steps of software installation to setup on PDA, DELL AXIM x51v with Bluetooth Manager. For other PDA or laptop device, the steps might vary. 2. In Pocket PC setting system panel, enable “manage GPS automatically”. Note: The setting may vary in other PocketPC or Smartphone , please check the manual or consult the technical service respectively. 3.
HOLUX M-1200E Bluetooth GPS Logger Manual 6. Connect to “Serial port” or “SPP Slave”, then tap “Finish” 7. Go to the “COM ports” panel to tap “New Outgoing Port”, choose “HOLUX_M-1200E” device and tap “Next”. 8. Select the COM port, then tap finish, it will show as right figure, and tap “OK” to finish the Bluetooth setting. Recommend not to use “Secure Connection” which may cause unstable connection. 9. Then you can enable your navigation map program to enjoy GPS function now.
HOLUX M-1200E Bluetooth GPS Logger Manual Federal Communications Commission (FCC) Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
