Datasheet

MAINTENANCE
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at 47
HOLZBANDSÄGE / WOOD BANDSAW / SEGA PER LEGNO HBS245HQ
15.4 Changing the v-ribbed belt
1.
 Relax the saw blade with the blade tension knob.
2.
 Open the lower saw band cover and remove the bandsaw blade from
the drive shaft.
 WARNING: gloves for the sawblade use !
3.

Loosen the v-ripped belt on the motor bracket with an
Allen key and relaxing.
4.
 Remove the outer retaining ring with the outer retaining ring
pliers.
5.
 Remove the drive roller of the drive shaft.
 Replace v-ripped belt and put the drive back to the drive
shaft.
 Attach retaining ring
 Insert v-ripped belt in the desired pulleys.
 ripped v-belt tension on the engine mount.
 Bandsaw blade on the drive roller hang up and check the
saw band in on good leadership.
 saw band tension with knob.
 Close Sawband cover
1.
2.
4.
5.
Blade tension knob
3.