User manual

OPERATION
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at Seite 19
USG 950
10 OPERATION
10.1 Setting drill in chuck
 The chuck (4) out of the device.
 The mount Grip by turning counterclockwise relax until the desired drill bit size is reached.
 drill in chuck (4) and turn slightly to mount Grip.
Open the terminal by pressing the springs
clamp button
Insert the chuck when clamp button
pushed down in the adjustment guide.
CAUTION: Insert the two rotary
limiting ribs in the two adjustment
grooves
By adjusting the grinding loss
(thickness) of the material can be
adjusted.
 low grinding loss in normal
sharpening.
 large grinding decrease in
damaged drills.
"+" means more material will be
removed.
"-" means less material will be
rremoved.
A
B
clamp button
Position claws
Fig. A
Drehbegrenzungsrippe
Slot on guide
Fig. B
_
+
Adjusting knob
Fig. C
Rib on drill holder
Fig. B