User manual

OPERATION
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at Seite 22
USG 950
10.4 sharpen knives
Turn on the power.
With one of the two different guides for each knife thickness,
the knife now sand as follows:
 The blade into the guide on the handle side and move
through the guide.
 When replacement Raise the blade, re-insert it in the initial
position and pull in the direction shown.
10.5 sharpen scissors
Turn on the power.
 The scissors ready to insert in the scissor-type guide and pull
in the direction of the arrow through the guide.
 While Navigating easily take the scissors out of the guide,
replace it in the original position and pull in the direction
shown.
10.6 Remove dust collection boxes
WARNING: Equipment of electricity disconnect!
After use, remove and clean the dust collection box from the machine.
Fig. H
Dust collection boxes