Pre-Delivery/Install Checklist

[e-mail]
770-864-5437
www.homacer.com
If you have any questions please contact us at:
PRODUCT SPECIFICATIONS
* This kit comes with Hex Bolt compatible with door thickness of 1 3/8" to 1 3/4". You may purchase
dierent hex bolts for door thickness out of the range listed when you look up this part number:
W_TGH_Hex Bolt (for Black)
W_DNZ_Hex Bolt (for Brushed Nickel)
*If your doors are over 2" you may need to purchase spacer extenders to help extend your track out by
3/4" to avoid the doors to slide against the wall preventing damage to accure. You may also use this
spacer extender when the thickness of your door and the trim combined is more than 2". The spacer
extender can also be applied if your doors are 1 1/4" or less to be accompanied with longer hext bolts to
help pus your doors closer to the wall to minimize the gap. You can look up the spacer extenders with
this part number:
W_TGH_Spacer Extender (for Black)
W_DNZ_Spacer Extender (for Brushed Nickel)
* Dierent rollers have dierent clearance from the top of the door to the ceiling. Classic has 6” clearance.
Straight has 5” clearance. Spoke Wheel has 8” clearance. That's all you need!
* This hardware kit comes with everything you need like anti jump pads, oor guides, door stoppers, lag
bolts, hex bolts all you need to mount the track to the wall and the door to the sliding hardware except
for doors. You don't have to look elsewhere for extra pieces to put a sliding door together. Doors are not
included.
* Tracks 8ft and under is one peice track with American Standard Spacing of 16in. Tracks 9ft and above
come with two or three pieces using a junction plate to connect, therefore the spacing between the two
holes where the tracks connect may not be 16in.
*Our rollers are made out of strong Nylon specically designed for a quiet rolling system.
*Material is made for indoor & outdoor use. We usually recommend to spray Rustoleum for longer lasting
usage when installing outdoors.
*To purchase the correct length of track is 2 x the size of the opening you are covering or more.
*This hardware can hold up to 220lbs total door(s) weight used per kit. When all lag bolts are installed on
to the studs it may hold up to a MAX of 300lbs.
*Installation will be provided with ONLY 8-STEP easy to follow instructions in the box.