MSDS

1. PRODUCT IDENTIFICATION
TRADE NAME (AS LABELED): HOMAX KNOCKDOWN TEXTURE
PRODUCT CODES: 4060, 4065, 4165
PRODUCT USE: Texture Patch
SUPPLIER/MANUFACTURER'S NAME: HOMAX PRODUCTS, INC.
ADDRESS: 200 WESTERLY ROAD
BELLINGHAM, WA 98226
CHEMTREC EMERGENCY NO.: 1-800-424-9300 (United States)
1-703-527-3887 (International Collect)
BUSINESS PHONE: 1-800-729-9029
DATE OF PREPARATION: July, 2008
2. COMPOSITION and INFORMATION ON INGREDIENTS
CHEMICAL
NAME
CAS # % w/w EXPOSURE LIMITS IN AIR
ACGIH-TLV OSHA-PEL NIOS
H
IDLH
OTHER
TWA STEL TWA STEL
mg/m
3
mg/m
3
mg/m
3
mg/m
3
mg/m
3
Titanium dioxide 13463-67-7
7 - 13 10 NE 15
(total dust)
NE NE NIOSH REL: NE
DFG MAK:
1.5 mg/m
3
Calcium carbonate 1317-65-3
7 - 13 10 NE 15 (total dust)
5 (respirable
fraction)
NE NE NIOSH REL:
10 (total dust)
5 (respirable fraction)
Perlite 93763-70-3
7 - 13 10 NE 15 (total dust)
5 (respirable
fraction)
NE NE NIOSH REL:
10 (total dust)
5 (respirable fraction)
Dimethyl ether
(PROPELLANT)
115-10-6
7 - 13 NE NE NE NE NE DFG MAK:
1900mg/m
3
(1000 ppm)
Peak II (8)
Water and ingredients present in
concentrations of less than 1%(or
less than 0.1% if carcinogens).
Balance The ingredients in the balance of this product do not contribute significant hazards
beyond those described in this document. All pertinent health, safety and
environmental information have been presented, per the requirements of the US
Federal OSHA Hazard Communication Standard (29 CFR 1910.1200) and
Canadian WHMIS. ALL WHMIS required information is included in appropriate
sections based on the ANSI Z400.1-1998 format. This product has been classified
in accordance with the hazard criteria of the CPR and the MSDS contains all the
information required by the CPR.
NE = Not Established. See Section 16 for Definitions of Terms Used.
page 1 of 6

Summary of content (6 pages)