INcaa013V01_US READ AND SAVE THIS INSTRUCTIONS FOR FUTURE USE ASSEMBLY & INSTRUCTION MANUAL
１
2 01 ② 2 2 2 ２
02 ③ 2 3 3 03 ① 2 ④ 4 1 4 4 4 4 1 ３
04 ⑤ 8 ⑦ 2 5 5 5 7 7 05 ４
Functional Description of Massager This massager is in 6-point, composed of a manual control board, wire rod and motor. It is available in 5 functional modes, and is provided with manual/automatic function, heat, time control and strong/weak control function. I. Specification of Massager 1. The required input voltage of the massager is 220V,50Hz. 2. The required output voltage of the massager is DC12v, 1.2A. II. Graphic presentation of Controller 1. POWER: turn on/off selection key 2.
3.INTENSITY: strong/weak selection key. 4. MODE: working mode selection key 5. BACK: back massage function selection key 6. LUMBAR: lumbar massage function selection key 7. THIGH: thigh massage function selection key 8. LEG: leg massage function selection key III. Operating Instructions 1. Insert the power into the DC socket 2. Press the POWER key to start the unit, when the unit will enter the first mode to run for 15min in the medium step, with all the corresponding indicators illuminated. 3.
