Instructions / Assembly
4
Installation
1
Preparing the tree and stand
□ Lay each of the three tree sections gently on the ground in
alphabetical order.
□ Remove the plastic protective cap at the end of each pole.
Save and re-use these protective caps when storing the
tree.
□ Open the metal stand (D) to form an “X” shape. Line up the
holes on the tube of the stand.
□ Thread an eyebolt (E) through the stand until you see or
feel the end of the eyebolt ush with the inside of the tube.
□ Locate the stand (D) on a stable and even space to ensure
the stability of the tree.
E
D
2
Assembling the tree
□ Place tree section C rmly into the stand (D) and secure in
place with the eyebolt (E). Ensure tree section C is standing
straight in the stand.
□ Insert tree section B into the top of tree section C, followed
by tree section A.
□ Shape the tree sections to create the desired appearance
for your tree. For example, shape some tips downward and
some tips upward to give shape to your tree and to ll in
any gaps – giving your tree a fuller and ufer appearance.
A
B
C
ON
OFF