Instructions / Assembly

5 HOMEDEPOT.COM
Please contact 1-877-527-0313 for further assistance.
Operation
□ To turn the lights on, simply plug the cord into an outlet.
□ To operate the lights, you can either use the remote control or the control box on the outlet cord:
□ A battery is included with the remote control. Pull the tab out of the battery compartment to activate the battery and press the ON
button. Use the buttons to cycle through the available lighting options.
□ The remote requires a battery with the model # CR2025 for use.
□ To use the control box on the outlet cord, press the White button to cycle through the available lighting options.
The available lighting options are:
□ Warm White: Steady Warm White
□ Multi: Steady Multi Color
□ SLO-GLO: Slow Twinkle (Warm White – Multi Color)
□ Twinkle Flash: Warm White to Multi Color fast twinkle
Control Box
Remote
Control
Care and Storage
□ Before disassembling the tree, unplug the tree and remove all ornaments and decorations. When unplugging the tree, do not pull on the
cord.
□ Gently lift the tree top straight up to remove from the center section and fold all branches towards the pole. Repeat this step for the
center and bottom tree sections.
□ When storing the product, carefully remove the product from wherever it is placed, including tree, branches, or bushes, to avoid any
undue strain or stress on the product conductors, connections, and wires.
□ Use the protective caps to cover the poles to avoid damaging the internal parts.
□ When not in use, store neatly in a cool, dry location protected from sunlight.
□ Keep out of reach of pets and children.
BULB REPLACEMENT
□ When replacing bulbs, pull the lamp and plastic base straight out of the lampholder. Replace with 3V/0.05W/Max0.06W LED color
changing bulbs.
Troubleshooting
Problem Solution
The tree does not light when plugged in. Check to ensure all tree sections are securely connected to each
other. Press the On/Off button on either the remote control or the
control box on the plug.