006 129 413 INSTRUCTION MANUAL SET-UP INSTRUCTIONS FOR THE 8 FT ANIMATED LED FERRY OF THE DEAD 1-877-527-0313, 8 a.m. to 5 p.m., EST, Monday-Friday info@pan-asian.com.hk.
READ CAREFULLY & RETAIN FOR FUTURE REFERENCE! Questions, problems, missing parts? Before returning to your retailer, call our customer service department at 1-877-527-0313, 8 a.m. to 5 p.m., EST, Monday-Friday or email at info@pan-asian.com.hk. WARNING: This is not a toy and is for decorative purposes only. For incoor/outdoor use. This item is not intended for use by children under the age of 14. Do not place product near an open fire or heat source such as a radiator, stove, etc.
WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
PART LIST: 1 Front Right & Back Left 2 Front Left & Back Right 3 Right Middle F A C QTY 2 4 Left Middle QTY 2 5 E QTY 1 6 Front Top Skull Front Top E B D F QTY 1 7 Back Top QTY 1 8 Lantern 9 Bones Kit QTY 1 10 Skeleton QTY 1 11 Front and back Support Rod for Boat QTY 2 QTY 1 I I 3 QTY 1 12 Back Support Rod for Boat A QTY 2 B QTY 1
13 Skeleton Support Rod 14 Support Rod for 15 Screws Boat front and Back C D E F QTY 1 16 Plistic Screwdriver QTY 2 17 18 Ground Stakes Fabric QTY 1 Part list for Reaper 19 Support Rod Base J QTY 1 20 Reaper’s Support Rod QTY 6 21 Body K J QTY 1 22 Hip Rod QTY 16 QTY 2 J 23 Left Arm QTY 1 24 Right Arm L K K QTY 1 QTY 1 4 QTY 1
25 Boat pole-Middle & Top 26 Boat pole-Bottom QTY 2 28 AC/DC adapter & Cable 27 Boat pole Skull QTY 1 QTY 1 29 Instructions Menu QTY 1 QTY 1 NOTE: If any parts are broken or missing first call the customer care number 1-877-527-0313 5
“CLICK” MEANS IT’S LOCKED LOCKING PIN ASSEMBLY: (Assembly Takes Approximately 45 Minutes with 2 Adults) Step 1 Step 2 F 3 Right Middle A 4 Left Middle E F A B B 3 14 BOAT BACK F E E 4 12 C C E 13 D D F E F F E BOAT FRONT 14 BOAT BACK BOAT FRONT 6
Step 3 Back View 11 I I Front View I 2 11 I 1 2 1 REPEAT STEP 3 AND STEP 4 TO ASSEMBLE THE OPPOSITE SIDE OF THE BOAT. 2 Step 4 11 11 1 1 2 2 1 Close the (8) x “Locking Clips” located inside the boat parts onto the corresponding (8) x “Locking Clip Attachments” to fasten and secure the boat parts together. 16 Use the plastic screw driver (16) and 4 x screws (15) to securely fasten the front right (1) to the front left (2) as shown.
Step 6 5 BOAT FRONT 13 BOAT BACK Step 7 1 16 2 Use the plastic screw driver (16) and 3 x screws (15) to securely fasten the front top (5) to the front of the boat as shown.
Step 11 Step 10 Step 10 16 Use the plastic screw driver (16) and 3 x screws (15) to securely fasten the back top (7) to the back of the boat as shown. DO NOT OVERTIGHTEN Step 12 14 Insert 2 x ground stakes (18) through the corresponding holes located in the support rods (14) and push or gently hammer (not included) to secure into the ground for outdoor display stability as shown.
5 Step 12-1 Use the plastic screw driver (16) and 2 x screws (15) to securely fasten the bones kit (9) to the front of the boat as shown. DO NOT OVERTIGHTEN 9 16 BOAT FRONT BOAT BACK INSTALLING THE FABRIC INTO THE BOTTOM OF THE BOAT Step 13: Unpack and Unfold the black fabric (17) BOAT BACK BOAT FRONT Step 14 Step 15 9 13 12 Slide the black fabric under support rods (11, 12, 13, and 14), all the way to the opposite end of the boat. Using the hook and loop tabs to secure into place as shown.
Step 17 13 Attach the two skeletons onto the Skeleton Support Rods (13). NOTE: Please install left skeleton first and then install the right side skeleton. as shown.
Step 19 ASSEMBLING THE REAPER Step 18 21 Sound Box Step 20 L 22 L K K K K 20 Align the two arrows, Connect the Black wires together and White wires together.
Step 24 Attach the right sleeve of the costume to the right hand using the hook and loop tabs to secure in place as shown Attach the left sleeve of the costume to the left hand using the hook and loop tabs to secure in place as shown Step 25 Step 26 12 Step 27 19 13
Step 28 19 14 Insert 4 x ground stakes (18) through the corresponding holes located in the support rods (14 and 19) and push or gently hammer (not included) to secure into the ground for outdoor display stability as shown.
Step 33 Sound Box Fully Assembled Product AC Adapter (DC 6V, 1.
Step 3 Back View 5 Front View “CLICK” Step 6 I 2 MEANS IT’S LOCKED LOCKING PIN 11 I I 1 5 2 1 BOAT FRONT ASSEMBLY: (Assembly Takes Approximately 45 Minutes with 2 Adults) Step 1 F 3 Right Middle A 4 Left Middle E F A B B 3 14 BOAT BACK F REPEAT STEP 3 AND STEP 4 TO ASSEMBLE THE OPPOSITE SIDE OF THE BOAT. E E 4 C 13 16 Use the plastic screw driver (16) and 3 x screws (15) to securely fasten the front top (5) to the front of the boat as shown.
