Instructions / Assembly

SSEMBLY

1 Assembling the Base Stand to the Lower Body

Insert the connecting rod on the Base Stand (F) into the connecting

hole at the bottom of the Lower Body (C) then secure together at the

connecting loops with the Bolt & Wingnut (L).

2 Assembling the Wings and Arms/Hands to the Upper Body

Insert the connecting rods on each Wing (D) and Arms/Hands (E) into the

connecting holes of the Upper Body (B) and fasten at the connecting loops

with Plastic Ties (I).

3 Assembling the Upper Body to the Lower Half of Body

Insert the connecting rod on the bottom of the Upper Body (B) into the

connecting holes on the top of the Lower Body (C) then secure together

at the connecting loops with the Bolt & Wingnut (L).

4 Assembling the Halo/Head to the Upper Body

Insert the connecting rods on Halo/Head (A) into the connecting holes on

the top of the Upper Body (B) and fasten at the connecting loops with

Plastic Ties (I).

5 Assembling the Ground Stakes

Insert Ground Stakes (K) over the metal frame of each corner of the

Base Stand then into the ground firmly.

6 Assembling the Anchoring Strings

Hook the plastic clipped end of each of Anchoring String (J) onto the metal

loop on the Wings (D) (see diagram below). Attach the looped end of the

Anchoring String to the top of the Ground Stakes (K). Pull the Anchoring

String with Stake tightly out and away from the Angel evenly at 4 corners

then insert the Stake firmly into the ground.