Manualshelf

Installation Guide

ManualsBrandsHome Accents Holiday ManualsArtificial Christmas Trees7.5 ft. Indoor Pre-Lit LED Artificial Power Pole Christmas Tree with Warm White Lights
123
Pre-Lit Tree Instruction Sheet
READ AND FOLLOW ALL SAFETY INSTRUCTIONS
When using electrical products, basic precautions should always be followed including the
following:



The product is for indoor use only.
To reduce the risk of fire, do not deliberately reposition either bulb or lampholder contact.
To reduce the risk of overheating, replace burned out lamps promptly. This is an electrical
product - not a toy! To avoid the risk of fire, burns, personal injury, and electric shock it should
not be played with or placed where small children can reach it.

Do not use seasonal products outdoors unless marked suitable for indoor and outdoor use.
When products are used in outdoor applications, connect the product to a Ground Fault Circuit
interrupting (GFCI) outlet. If one is not provided, contact a qualified electrician for proper
installation.


This seasonal use product is not intended for permanent installation or use.
Do not mount or place near gas or electric heaters, fireplaces, candles or other similar sources
of heat.






Do not secure the wiring of the product with staples or nails, or place on sharp hooks or nails.
Do not let lamps rest on the supply cord or on any wire.
Unplug the product when leaving the house, when retiring for the night, or if left unattended.
Do not use this product for other than its intended use.
Do not hang ornaments or other objects from cord, wire, or light string.
Do not close doors or windows on the product or extension cord as this may damage the wire
insulation.

Do not cover the product with a cloth, paper or any material not part of the product when in
use.

This product has a polarized plug (one blade is wider than the other) as a feature to reduce the
risk of electric shock. This plug will fit in a polarized outlet only one way. If the plug does not fit
fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not
use an extension cord unless plug can be fully inserted. Do not alter or replace the plug.
Read and follow all instructions that are on the product or provided with the product.
PRE-LIT TREE ASSEMBLY INSTRUCTIONS:
1. Follow the stand assembly instructions to set up the tree stand.
a. Pull apart the legs of the stand so
that they are X-shaped.
b. Screw the eye bolts through the
hole of metal tabs. Turn screws so
they touch tree trunk. Stand tree up
and straighten by adjusting screws
in or out then tighten screws.
Page 1 of 3
2. Assemble the tree according to below diagram.
3. This pre-lit tree equipped with easy-décor power supply system, please follow the diagram for
assembly instruction.
4. Shape the tree to a natural look. Following diagram for your reference.
5. Plug the product to a standard AC outlet. Your tree is ready for decoration.

Summary of content (3 pages)