Instructions / Assembly

1 Assembling the Legs to the Body of Baby Deer

Insert the connecting rods on the Baby Deer's Front and Hind Legs (E,F)

into the connecting holes on the underside of the Body (C) and fasten

together at the connecting loops with the Plastic Ties (Q). The Legs come

with metal bars attached to stabilize the Baby Deer. Insert the hooked end

of the metal bars into the metal hole on the opposite Leg.

SSEMBLY

2 Assembling the Head/Neck to Body of Baby Deer

Insert the connecting rods on the bottom of the Baby Deer's Head/Neck (B)

into the connecting holes on the front of the Body of Baby Deer (C) and

fasten together at the connecting loops with Plastic Ties (Q).

3 Assembling the Ears & Tail to Body of Baby Deer

Insert the connecting rods on both Ears of Baby Deer (A) into the matching

connecting holes at the top of Head/Neck of Baby Deer (B). Insert the

connecting rod on the Tail of Baby Deer (D) into the connecting hole at the

rear of Body of Baby Deer (C). Insert the wires on the backside of the Bow

of Baby Deer (N) through the material on the body then twist the wires

together to secure.

4 Assembling the Legs to the Body of Doe

Insert the connecting rods on the Front and Hind Legs of Doe (K,L) into the

connecting holes on the underside of the Body of Doe (I ) and fasten together

at the connecting loops with the Plastic Ties (Q). The Legs come with metal

bars attached to stabilize the Doe. Insert the hooked end of the metal bars

into the metal hole on the opposite Leg.

5 Assembling the Head/Neck to the Body of Doe

Insert the connecting rods on the Head/Neck of Doe (H) into the connecting

holes on the front of the Body of Doe (I ) and fasten together at the connecting

loops with Plastic Ties (Q).

6 Assembling the Ears & Tail to Body of Doe

Insert the connecting rods on both Ears of Doe (G) into the matching

connecting holes at the top of Head /Neck of Doe (H). Insert the connecting

rod on the Tail of Doe (J) into the connecting hole at the rear of Body of Doe

(I ). Insert the wires of the Bow of Doe (M) through the material of the body

then twist the wires together to secure.

7 Assembling the Ground Stakes

Insert the Ground Stakes (R) over the metal frame at each hoof of the Baby

Deer and the Doe then firmly into the ground.