Instructions / Assembly

Safety Information Installation
Pre-Operation
Package Contents
IMPORTANT SAFETY
INSTRUCTIONS
When using electrical products, basic precautions should
always be followed, including the following:
a.
READ AND FOLLOW ALL
SAFETY INSTRUCTIONS.
b. This is an electrical product - not a toy! To avoid risk of fire,
burns, personal injury, and electric shock, it should not be
played with or placed where small children can reach it.
c. Do not use seasonal products outdoors unless marked
suitable for indoor and outdoor use. When products are
used in outdoor applications, connect the product to a
Ground Fault Circuit Interrupting (GFCI) outlet. If one is
not provided, contact a qualified electrician for proper
installation.
d. This seasonal use product is not intended for permanent
installation or use.
e. Do not mount or place near gas or electric heaters,
fireplaces, candles, or other similar sources of heat.
f. Do not secure product wiring with staples or nails or place on
sharp hooks or nails.
g. Do not let lamps rest on the supply cord or on any wire.
h. Unplug the product when leaving the house, when retiring
for the night, or if left unattended.
i. Do not use this product for other than its intended purpose.
j. Do not hang ornaments or other objects from cord, wire, or
light string.
k. Do not close doors or windows on the product, or extension
cords, as this may damage the wire insulation.
l. Do not cover the product with a cloth, paper, or any material
not part of the product when in use.
m. Do not place the product against carpeting, furniture, or any
other fabric when in use.
n. This product has a polarized plug (one blade is wider than
the other) as a feature to reduce the risk of electric shock.
This plug will fit in a polarized outlet only one way. If the plug
does not fit fully in the out
let, reverse the plug. If the plug
still does not t, contact a qualified electrician. Do not use an
extension cord unless the plug can be fully inserted. Do not
alter or replace the plug.
o. This product employs overload protection (fuse). A blown
fuse indicates an overload or a short-circuit condition. If the
fuse blows, unplug the product from the outlet. Also unplug
any additional string or products that may be attached to
the product. Replace the fuse as per the user servicing
instructions (follow product markings for proper fuse rating)
and check the product. If replacement fuse blows, a short-
circuit may be present and the product should be discarded.
p. Read and follow all instructions that are on the product or
provided with the product.
q.
SAVE THESE
INSTRUCTIONS
Preparing for Installation
Step 1. Lay the inatable unit (A) on the ground with the bottom
side up in a clear area.
Step 2. Locate the four clips attached to the bottom of the unit
and attach to the plastic legs of the inatable unit (A).
Securing the unit to the ground
Step 1. Turn the inflatable unit (A) over so that the bottom is on
the ground.
Step 2. Ensure that the air intake on the inflatable unit (A)
is clear of fabric and other obstructions and that the
zipper is fully closed.
Step 3. Insert the base stakes (B) through the plastic legs of
the inflatable unit (A) and into the ground.
CAUTION:
Do not attempt to inflate this unit during
unusually strong winds. If it becomes too windy for safe
operation, allow the unit to deate and wait for safer conditions.
CAUTION:
Protect the fan and power cord from
direct exposure to water. This reduces the risk of electrical
shock.
CAUTION:
When the outdoor temperature is
below 14°F (-10°C), the motor may temporarily stop running.
The motor will begin to function again with higher outdoor
temperatures. Before you use or re-use this product, inspect
it carefully. Discard if the product has cuts, damage, frayed
wire insulation or cords, cracks in the socket enclosures, loose
connections, or exposed copper wire.
Part Description Quantity
A Inflatable unit 1
B Base stakes 8
C Tether stakes 4
D Tethers 4
E Spare bulb 1
F Spare fuse 1
A
A
B
INFLATABLE
INSTRUCTIONS
6

Summary of content (2 pages)