Instructions / Assembly

1/3
A
H I J K L
M
N O P Q SR
T
B
C
D
D
D
E
A
A
B
C
C
C C
B
C
C
C
C
B
F
G
PARTS LIST
A. Base x 1
B. Center Support Pole x 1
C. Support Pole x 4
D. Box Frame Top x 1
E. Box Fabric x 1
F. Box Lid Frame x 1
G. Box Lid Fabric x 1
H. Spring x 1
I. Torso Frame x 1
J. Head x 1
K. Left Arm x 1
L. Right Arm x 1
M. Right Sleeve x 1
N. Left Sleeve x 1
O. Left Hand x 1
P. Right Hand x 1
Q. Rear Fabric Cover x 1
R. Collar x 1
S. Hat x 1
T. Adapter * x 1
* Power Adapter Spec
Input: 100 - 240VAC 50/60Hz
Output: 5.9V 1.5A
Right and Left are relative to the character.
Note: Throughout the instructions, Right
and Left are relative to the character.
USA/ États-Unis 1005273505
Canada 1001519443
TM
EASY ASSEMBLY AND OPERATION INSTRUCTIONS
5124731_ Jack in the Box
WARNING
This item is not a toy and should be used for decoration only. This item contains small parts that can be a choking
hazard. Keep all plastic and wire parts away from children.
1. Please use the adapter supplied by manufacturer.
2. Please assemble item according to instructions. Connect all wires according to matching color.
3. Children should be supervised by adults. Item should not be grabbed, as it becomes a tipping
hazard. Keep all away from the transformer, as it heats up during operation.
Please view all instructions carefully before assembling. Save this instruction sheet for future reference.
CARE AND STORAGE INSTRUCTIONS
For best performance operate your item indoors. When not in use, store this product in it’s original packing. Keep
away from heat and moisture.
TROUBLE SHOOTING:
• Ensure that the item's adapter is plugged in at the Function Control Box and in the wall.
• Ensure that the switch on the function control box is on the desired setting.
• If not functioning properly (ex: Mouth doesn't move, eyes don't light up, body doesn't move), ensure that cables are connected to their corresponding cable as shown in the instruction sheet.
• Be sure nothing is blocking movement or caught in moving parts.
• Ensure that the floor or surface that the item sits on is flat and level.
• Be sure nothing is blocking the sensor.
1.1 1.2 2.1 2.2
Front
Back
Right
Left
Means It's
Locked
Click
Locking Pin
Note: The two
holes at the top
of the fabric both
go towards the
back over the
housings
available on the
(D) Box Frame
Top.
BEFORE ASSEMBLING, REMOVE ALL THE ABOVE PARTS FROM BOX. IF ANY PART IS MISSING, DO NOT ATTEMPT TO ASSEMBLE THE PRODUCT AND CONTACT
CUSTOMER SERVICE FROM 8:30AM TO 5:30PM PST AT 1-877-527-0313, 1-855-428-3921.EMAIL [e-mail].
E
Please follow the step by step guide and enjoy your
Jack in the Box!