Instructions / Assembly

** Please note that it is normal for some frosting to fall off when setting up the products.**
Assembly:
Make sure to place the pot on a level, hard, flat surface against the wall
before assembling the tree.
SAVE THESE INSTRUCTIONS
P. 1
MADE IN CHINA
Fig. 1
Instruction Manual
1. Insert tree into the pot as shown in (Fig. 1).
2. Manually pull down each branch on the tree from the tree trunk.
3. Shape the branches. Shift branches to fill any gaps, lightly upsweep all
branch tips for a uniform look.
4. Open the lid of the battery box by releasing the locks. Insert 4 AA
batteries* into the compartment, making sure that the batteries are in the
correct orientation. Close the lid by the locks.
5. Press the button on the battery box once for timer mode, twice to turn
the lights constantly on, and a third time to turn the lights off or reset the
timer. The built-in timer mode causes the lights to turn on and off in a cycle:
on for 6 hours then off for 18. The user should initially turn on the lights at a
specific time of their choice, and then the lights will turn on every day at
approximately the same time.
6. Replace batteries when the lights become dim. Remove batteries from
unit when it is not used.
IMPORTANT: Please read this instruction carefully before assembly
and save these instruction for future use.
Sku # 1001370798
Model: BOWOTHD182B

Summary of content (2 pages)