Instructions / Assembly

Printed in China
INSTALLATION:
FEATURES:
1. Carefully take the product out of the box.
2. You will find the battery control box on the back side of this product. Turn the switch to the “OFF” position.
3. Open the battery box cover and insert 2 D size batteries. Make sure the batteries are inserted correctly.
4. Turn the switch to “ON” and the lights will turn on.
Pre-programmable function:
TThis battery operated control box comes with a pre-set timer function. When you turn the switch to “Timer”, the lights
will automatically come on and stay lit for 6 hours. The lights will automatically turn off after the 6 hours and remain off
for 18 hours. This cycle will then continue as long as the switch is in the timer position.
Light Functions:
There are two light functions with this control box – Steady & Twinkle
1. Steady – When you turn the switch to “Steady”, the lights will stay lit;
2. Twinkle – When you turn the switch to “Twinkle”, the lights will have a twinkling effect.
2. Do not mix old and new batteries (or different types of batteries).
3. Batteries are to be inserted with the correct polarity.
4. Exhausted batteries should be removed from the battery holder.
5. Never allow any plastic part of this control box to come in contact with any source of heat or flame.
6. Batteries are not included with this product.
7. Do not dispose of batteries in fire. Batteries may explode or leak．
1. Indoor and outdoor use.
2. Do not cover this product with any material when in use.
3. Dispose of all exhausted batteries properly.
4. Non-rechargeable batteries should not be recharged.
5. Always purchase the correct size and grade of battery most suitable for the intended use.
6. Always replace the whole set of batteries at one time, taking care not to mix old and new batteries or batteries of
different types.
7. Ensure the batteries are installed correctly with regard to polarity (+ and -).
8. Remove batteries from equipment that will not be used for an extended period of time.
9. Remove used batteries promptly.
10. Do not mix alkaline, carbon-zinc, lithium, or re-chargeable (Nickel-Cadmium or other types) batteries.
11. Dispose of batteries properly by following directions on batteries.
12. Replace only with D size batteries.
13. Do not ingest batteries. Small parts, keep away from children.
14. For recycling and disposal of batteries to protect the environment, please check the internet or your local phone
directory for local recycling centers and/or follow local government regulations.
15. Remove batteries when not used for an extended period of time, or when depleted.
16. Clean the battery contacts prior to battery installation.
17. DO NOT DISPOSE OF BATTERIES IN FIRE. BATTERIES MAY EXPLODE OR LEAK.
CAUTIONS:
WARNING:
TWINKLE
SCINTILLEMENT
CENTELLEO
STEADY
STABLES
ESTANLLE
ON
SUR
EN
TIMER
OFF
TWINKLE
SCINTILLEMENT
CENTELLEO
STEADY
STABLES
ESTANLLE
ON
SUR
EN
TIMER
OFF