Instructions / Assembly

6.5FT Pre-lit Jackson Spruce Christmas Tree
Assembly Instructions
– FOR INDOOR USE ONLY –
Parts
Part
Description
Illustration
Qty
A Tree Top Branch Section 1
B Middle Branch Section 1
C Lower Branch Section 1
D Tree Stand 1
To Assemble
NOTE: Before beginning assembly, ensure all listed parts are
included.
1. Assemble the product near a 120-volt AC electrical
outlet
2. Place the Tree Stand (D) on a flat, level, stable surface.
Open legs so they are perpendicular to each other.
3. Insert the Lower Branch Section (C) into the Tree
Stand (see Fig. 1) and tighten the Thumb Screws
evenly into the holes in the Tree Stand.
4. Insert the Middle Branch Section (B) into the Lower
Branch Section (C) and then connect the string
lighting plugs from the Middle Branch Section (B) to
the Lower Branch Section (C) (see Fig. 2). Repeat
to attach and connect the Tree Top Branch Section
(A) to the Middle Branch Section (B).
5. Lower, spread open, and arrange the branches in
the Tree Top Branch Section (A), the Middle Branch Section (B),
and the Lower Branch Section (C) (see Fig. 3).
6. Insert the power cord’s plug into the 120-volt AC electrical outlet
to light the tree.
MODEL# GS01A00093
SKU# 722 888