Instructions / Assembly

National Tree Company 2 Commerce Drive, Cranford, New Jersey 07016 USA www.nationaltree.com
RETAIN FOR YOUR RECORDS:
Tree Style No. UPC Code
Store Where Purchased
Date Purchased Price
LIMITED WARRANTY FOR ARTIFICIAL CHRISTMAS TREES
New product registration can
only be completed online at
nationaltree.com/customer-service.html
Please read this warranty thoroughly and familiarize yourself
with its restrictions and requirements.
National Tree Company warrants its trees against
manufacturer-only defects for a period of five (5) years
from date of purchase. (White Trees, one year).
Manufactured defective parts will be repaired or replaced.
The lights on Pre-Lit Trees are warranted for a period of two
(2) years from date of purchase (see below).
This Warranty does not apply to Trees that are used as display
trees in the store. This tree is for indoor use only. Outdoor use
of this tree voids the warranty.
PRE-LIT TREES LIMITED WARRANTY
National Tree Company warrants the light sets on its Pre-Lit
trees against manufacturer-only defects in material or
SAVE YOUR SALES RECEIPT. It will be needed when requesting warranty service.
workmanship for a period of two (2) years from date of
purchase. Culpability of Company is limited to replacement of
defective light set only.
To have the Warranty placed into effect, a Proof of
Purchase is required, noting purchase date.
Keep product away from heat and moisture. This limited
warranty does not cover damage resulting from accident,
misuse, abuse, negligence, or normal wear. In these
instances, parts can be purchased at a reasonable fee plus
shipping charges at www.nationaltree.com/onlineparts or by
calling 1-888-494-PART (7278).
Shipping Costs under Warranty Terms: National Tree
Company will pay the cost of shipping (to our facility and back
to customer), under warranty terms, during the first season
of use. After the first season of use, the customer will be
Storage
Remove all holiday decorations. Gently press tips back into center
branch. Raise all branches to original upright position taking care not
to place undue pressure on the attached ends of the branches. When
disassembling tree, a twisting motion will help to separate the sections
from each other. All tree parts can be replaced in carton and should
be stored in a cool, dry place.
Shaping the tree branches is the last
s
tep of assembly. The care and
attention given to this final process will
result in a genuinely beautiful and
appealing holiday centerpiece.
1. Every tree style is shipped from the
factory with the tips of each branch
compressed to the center (Figure 1).
2. Each branch tip must be shaped to
it’s proper position to give the tree a
natural look. This is done by gently
grasping the left and right wing tips
and spreading them out away from
the center tip (Figure 2).
3. Each individual tip should then be
spread out separately. Tips should
then be bent slightly upward to add a
more natural looking appearance.
Figure 3 shows a typical tree branch
after shaping.
4. As you shape closer to the top, the
branches will not have wing tips, but
will otherwise shape in the same
manner as lower sections.
F
ig. 1
Fig. 2
Fig. 3
Shaping Instructions
1. Unplug light string from power source.
2. Pull up on the Bulb Lock unlatching
the bulb from the bulb socket. Gently
pull the bulb straight out (Figure 1).
3
. Before inserting the new
bulb into socket, make sure
that the two wires on either
side of the the bulb base
are straight up and flush
with the base (diagram at
right).
4. Carefully insert new bulb into socket
and push down Bulb Lock until it
snaps into place (Figure 2).
1. Unplug light string from power source.
2. Fuses are located in light string plug.
Slide the fuse access cover away
from cord side (in direction of arrow,
Figure 3) exposing fuses.
3. Remove fuses from compartment
and examine. Replace burnt out fuse
with new one.
4. Close fuse compartment by sliding
access cover back in towards cord
side of plug (Figure 4).
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Bulb Replacement Instructions
Fuse Replacement Instructions
The branch tips of Hook-On trees should be shaped prior to
attachment to center pole. The tips of Hinged and Wrapped trees
should be shaped after they have been lowered.
responsible for cost of delivery to our facility. All shipping costs
for warranty service after the second year of use will be the
responsibility of the customer.
WARRANTY SERVICE:
Customers are required to contact National Tree Company
for authorization of return prior to shipping product for
warranty service. Email us at [e-mail] or
call 1-888-494-PART (7278).
At the discretion of National Tree Company, you may either
receive a replacement part or be instructed as to which part(s)
to ship prepaid to National Tree for our inspection and
determination and/or possible repair. Replacement or repair
as provided by this limited warranty is our exclusive remedy
to the consumer and does not place National Tree Company
liable for any incidental or consequential damages.
4