Instructions / Assembly

Christmas Tree

Model: TG76P2621L06

Sku # XXXX XXX XXX

CAUTION:

Use only power adaptor that was provided with this product.

Using a different power adaptor will damage the lights and

cause fire, electrical shock hazard.

IMPORTANT SAFETY

INSTRUCTIONS

1. WARNING: SMALL PARTS, KEEP AWAY FROM CHILDREN.

2. Do not expose light set to moisture.

3. Remove batteries when not used for an extended period

of time, or when depleted.

4. Dispose of used batteries properly by following directions

on batteries.

5. Use only CR2032 batteries for the remote controller.

6. Clean the battery contacts prior to battery installation.

7. DO NOT DISPOSE OF BATTERIES IN FIRE. BATTERIES MAY

EXPLODE OR LEAK.

Troubleshooting

Problem Solution

The tree does

not light

Ensure that all tree sections are

plugged into each other and that the

tree is plugged into the wall. If your

tree came with a foot pedal, step on

the On/Off button.

Check for loose, broken, or missing

bulbs and replace as needed with the

replacement bulbs provided

2. Replace the used battery with a new CR2032 button cell

battery (not included). Make sure that the battery is

installed with the correct polarity (+ and -).

3. Retighten the screw to close and secure the battery cover.

Cover

Battery

CR2032