Instructions / Assembly

Safety Information
IMPORTANT SAFETY
INSTRUCTIONS
a. READ AND FOLLOW ALL
SAFETY INSTRUCTIONS.
When using electrical products, basic precautions should
always be followed, including the following:
b. Do not use seasonal products outdoors unless marked
suitable for indoor and outdoor use. When products are
used in outdoor applications, connect the product to a
Ground Fault Circuit Interrupting (GFCI) outlet. If one is
not provided, contact a qualified electrician for proper
installation.
c. This seasonal product is not intended for permanent
installation or use.
d. Do not mount or place the product near gas or electric
heaters, fireplaces, candles, or other similar sources of
heat.
e. Do not secure the wiring of the product with staples or
nails, or place on sharp hooks or nails.
f. Do not let lamps rest on the supply cord or on any wire.
g. Unplug the product when leaving the house, when
retiring for the night, or if left unattended.
h. This is an electric product and not a toy! To avoid risk of
fire, burns, personal injury and electric shock it should not
be played with or placed where small children can reach it.
i. Do not use this product for other than its intended use.
j. Do not hang ornaments or other objects from cord, wire,
or light string.
k. Do not close doors or windows on the product or exten
sions cords as this may damage the wire insulation.
l. Do not cover the product with cloth, paper, or any materi
al that is not a part of the product when in use.
m. This product is equipped with push-in type lamps. Do not
twist lamps.
n. Read and follow all instructions that are on the product
or provide with the product.
o.
SAVE THESE INSTRUCTIONS
Step 1. Grasp the power adapter or power cord plug, and than
unplug from the power outlet. Do not pull the power cord.
Step 2. Lift up lamp lock tab, then pull the
lamp and plastic lamp base straight
out of the lamp-holder.
Step 3.
Replace with a new spare lamp
provided with this product.
( Reference figure only)
USER SERVICING INSTRUCTIONS
LAMP REPLACEMENT
Christmas Tree
Model: TGF0M3P07L01
Sku # 206795493
TM
Package Contents
Pre-Assembly
Part Description Quantity
A Tree top
1
B Tree center, Sticker 8 1
C Tree center, Sticker 7 1
D Tree center, Sticker 6 1
H Tree center, Sticker 2 1
E Tree center, Sticker 5 1
F Tree center, Sticker 4 1
G Tree center, Sticker 3 1
I Tree center, Sticker 1 1
J Tree stand 1
Assembling the tree stand
Assembly
Bottom Cross Frame
Horizontal Connection Frame
Vertical Connection Tube
“L” Shape VerticalTube
Tube For Hooking Branches
Top Cross Flame
Bolt - Spec M8*16mm
Bolt - Spec M8*50mm
Nut - Spec M8
Triangle Bolt - Spec M6*18mm
Tree Stand Part List
No. Name Qty
1
1 PC
1 PC
1 PC
4 PCS
4 PCS
4 PCS
8 PCS
8 PCS
8 PCS
6 PCS
2
3
4
5
6
7
8
9
10
Choose a location near a wall outlet,begin to assemble
the tree.
Follow below steps:
Step 1. Connect part 1 to 2, then screw part 7(Bolt).
Step 2. Connect part 2 to 3, then screw part 8(Bolt)
Step 3. Insert tree section 9 (I) to bottom cross frame(J),
and then insert tree section 8 (H) to section 9 (I),
section 7(G) to section 8 (H), then section 6(F) to
section 7 (G).
Step 4.
Connect part 3 to part 4, then screw part 7(Bolt).
Step 5. Connect part 4 to part 6, then screw part 8(Bolt).