Instructions / Assembly

USE AND CARE GUIDE
4ft Wire Reindeer
THANK YOU
We appreciate the trust and confidence you have placed in Home
Accents through the purchase of this 4ft Wire Reindeer. We strive to
continually create quality products designed to enhance your home.
Visit us online to see our full line of products available for your home
improvement needs. Thank you for choosing Home Accents!
Guarantee
What is Covered
The product is intend for residential seasonal use only. 90 days maximum
per year. This product is covered by a 90 days limited guarantee due to
defects in material and workmanship. Return the product with purchase
receipts to the location of purchase for refund within 90 days of purchase.
What is Not Covered
This warranty does not cover commercial use, normal wear and tear,
products not used in accordance with directions provided on or with the
product, burn out of bulbs or LEDS, batteries, products that have been
subjected to unauthorized repair and/or modification and damage caused
by shipping and improper handling, alterations, misuse or accidents.
Questions, problems, missing parts? Before returning to the store, call
Home Accents Holiday Customer Service 8 a.m.-6 p.m., EST, Monday-Friday
1-877-527-0313
HOMEACCENTSHOLIDAY.COM
Pre-Assembly
PLANNING ASSEMBLY
Carefully remove all the parts from the box, and place them on a flat surface. Read the entire manual
prior to assembly, and identify all the parts included in the package against the parts list. If any parts are
missing or damaged, do not attempt assembly, but contact our customer service center.
Assembly of this product may require more than one person. Tools Required: Hammer, Pliers
PACKAGE CONTENTS
SKU # 155 551
Model # TY069-1213
Package Contents/Parts List
Part Description Quantity
A Antlers/Ears 2
B Head/Neck 1
C Body 1
D Front Legs 1
E Tail 1
F Bolt & Nut 1
G Ground Stakes 4
H Plastic Ties 5
I Fuse 1
J Replacement Bulbs 5
A
ssembly
Assembling the Deer
Step 1. Unfold the hind legs from the Body (C) and insert the hook, located on the inside rear
of the body, into the corresponding hole at the top of one hind leg, repeat with the other hind
leg. Fig.1
Step 2. Insert the Tail (E) into the rear of the Body Section. Fig.1
Step 1.Hook and align the Front legs(D) with the bottom of the front of the Body then fasten
them together with the Bolt & Nut (F).Fig.2
Step 2. There are a pair of hooks on the back of the Head/Neck (B). Hang the hooks onto the
front of the Body so it supports the Head/Neck. Fig.2
Step 3. Insert the two metal rods in the bottom of the Antlers/Ears (A) into the holes on top of
the Head (B) and Secure with the Plastic ties (H). Fig.2
Step 4. Secure the Deer to the ground with the Ground Stakes (G). Fig.2
Pre-Operation
CAUTION: Grasp by the plug to remove or insert into power source. Do not
unplug by pulling on cord.
CAUTION: The lighting string on this product is rated at 61.2 Watts (0.51
Amps). Do not overload. Do not connect to another lighting string, decorative outfit or other
product. Before you use or re-use this product, inspect it carefully. Discard if the product has
cuts, damage, frayed wire insulation on cords, cracks in the socket enclosures, loose
connections or exposed copper wire.
Care and Cleaning
a. Carefully remove the product from wherever it is placed. This helps to avoid any undue
strain or stress on the product conductors, connections, and wires.
b. Wipe the unit with a damp cloth and allow the unit to dry before storing.
c. Store the product neatly in a cool, dry location protected from
sunlight.
FOR INDOOR AND OUTDOOR USE
G.
H. I. J.
F.
A
D
C
B
E
Fig. 1
Fig. 2