Instructions / Assembly

SSEMBLY

1 Assembling the Lower Gown

Align the two halves of the Lower Gown (E) with each other then insert

the connecting rods on one half into the connecting holes on the other

half and fasten at the connecting loops with Plastic Ties (M).

2 Securing the Lower Gown to the Base Stand

Secure the Lower Gown (E) and the Base Stand (J) together at the

connecting loops with the Bolt & Wingnuts (N).

3 Assembling the Upper Gown then securing to Lower Gown

Align the two halves of the Upper Gown (D) with each other then insert

the connecting rods one half into the connecting holes on the other half

and fasten at the connecting loops with Plastic Ties (M). Insert the

connecting rods on the bottom of the Upper Gown (D) into the

connecting holes on the top of the Lower Gown (E) and fasten at the

connecting holes with Plastic Ties (M).

4 Assembling the Hair to the Head / Body & Halo to the Hair

Insert the connecting rods on the Hair (B) into the connecting holes on the

top of the Head / Body (C). Attach the connecting rod on the Halo (A) to the

connecting holes on the Hair (B).

5 Assembling the Arms and Star

Insert the connecting rods on each Arm / Hand (G) into the matching

connecting holes on the sides of the Head/Body (C) and fasten at the

connecting loops with Plastic Ties (M). Insert the connecting rods on the

Star (H) into the matching connecting holes of the left Arm / Hand (G)

and fasten with Plastic Tie (M)

6 Assembling the Wings to the Body

Insert the connecting rods on each Wing (F) into the matching holes on the

back of the Body (C). Attach the connecting rod on the front of the left

Wing to the connecting hole on the back of the left Arm / Hand (G).

7 Assembling the Sashes & Head / Body to the Upper Gown

Insert the connecting rods on the bottom of the Head / Body (C) into the

matching connecting holes on the top of the Upper Gown (D) and fasten

at the connecting loops with Plastic Ties (M). Wrap the Sashes (I) around

the Waist of the Angel and secure with the Velcro closure.

8 Assembling the Strings and Ground Stakes

Hook the plastic end of each of Anchoring Strings (O) onto the matching

loop in the Body at the shoulders. Attach the free looped end of each String

(O) to the clip on the Ground Stakes then tightly secure the Ground Stake

to the ground evenly and away from the Angel at four sides. Insert the

remaining 4 Ground Stakes (P) over the metal frame of each corner of the

Base Stand then into the ground firmly.