Instructions / Assembly

Assembly
Assembling the Acrylic Santa
Step1. Align the two Halves of Body (B) with each other and Insert the rods on one half into the
matching hole in the other half then fasten with Plastic Ties (F). Insert the rods of the Feet (D)
into the matching holes on the bottom of the Body (B) then fasten them together with Plastic
Ties. (FIG.1)
Step 2. Stand the Body section in an upright position. Insert the metal rods of the Head (A) into
the matching holes on the top of the Body (B) and fasten them together with Plastic Ties. (FIG.1)
Step 3. Insert the metal rods on each of the Arm (C) into the matching holes on either side
of the Body (B) then fasten together with Plastic Ties (F). (FIG.2)
Step 4. Secure the Santa to the ground by using the Ground Stakes (E). (FIG.2)
Pre-Operation
CAUTION:
Grasp the plug to insert or remove from the power source.
Do not unplug by pulling on cord.
CAUTION: The lighting string on this product is rated at 4.8 Watts
(0.04 Amps). Do not overload. Do not connect to other lighting strings, decorative
outfit or other electrical products. Before you use or re-use this product inspect it
carefully. Return to place of purchase or consult a certified Electrician if the product
has cuts, damage or frayed wire insulation on cords, cracks in the socket enclosures,
loose connections or exposed copper wire.
Care and Cleaning
a. Carefully remove the product from wherever it is placed. This helps to avoid any
undue strain or stress on the product, wire and lighting connections. If the product
is placed somewhere other than the ground it should be well secured and stable.
b. Wipe the product with a damp cloth and allow the product to dry before storing.
c. Store the product neatly in a cool, dry location protected from sunlight.
FOR INDOOR AND OUTDOOR USE
FIG.1
FIG.2