Instructions / Assembly

SSEMBLY

1 Assembling the Body, Tail and Hat

Align the two Halves of Upper Body (C, D) then insert the connecting

rods on one half into the connecting holes on the other half and fasten

with Plastic Ties (K) over the metal frames.

Unfold the Base Stand (I) and insert the connecting rods on the Base

Stand into the connecting holes on the Lower Body (E).

Insert the connecting rods on the bottom of the Upper Body into the

connecting holes on the top of the Lower Body and fasten with Plastic

Ties (K) over the metal frames.

Insert the connecting rods of the Hat (A) into the connecting holes on

the Head. Insert the connecting rods on the Lower Body into the

connecting holes on the Tail (H).

2 Assembling the Flippers, Dorsal Fin and Gift Box and

Securing the Dolphin to the Ground

Insert the connecting rods on the Flippers (G) into the matching holes in the

side of the Upper Body.

Insert the connecting rods of the Dorsal Fin (B) into the matching holes in

the back of the Dolphin.

Insert the connecting rods of the Gift Box (F) into the matching holes of the

Flippers (G).

Secure the Dolphin to the ground with the Ground Stakes (J) by placing the

Ground Stake over the Metal Frame then into the ground.