Instructions / Assembly

SSEMBLY

1. Assembling the Legs to the Body

Insert the metal connecting rods attached to each Leg (E&F) into the

matching holes on the underside of the Reindeer Body (D) and fasten

them with Plastic Tie (N). The Legs come with metal bars attached to

stabilize the Deer. Insert the hooked end of the metal bars into the metal

nut on the opposite Leg.

2. Assembling the Tail to the Body

Insert the connecting rod on the Tail (G) into the connecting holes at the

rear of the Body (D).

3. Assembling the Head / Neck to the Body

Insert the connecting rods on the bottom of the Head/Neck (B) into the

Connecting holes on the front of the Body (D) and fasten them with

Plastic Tie (N).

4. Assembling the Antlers and Ears to the Head

Insert the connecting rods on both Antlers and Ears (A&C) into the

connecting holes at the top of Head (B).

5. Assembling the Runners

The Sleigh has 4 Runners (J). Two Front and two Rear. Insert the

connecting rods on each Front Runner into the matching holes on the

Rear Runners. Fasten with Plastic ties. Hook each Horizontal Stabilizing

Bar into the matching holes on the opposite side Runner.

6. Assembling the Decorative Runner Cap to the Front

Runner

Insert the connecting rod on the Decorative Runner Cap (K) into the

matching hole of the front of the Runners (J) and fasten them with Plastic

Tie (N).

7. Assembling the Side Panels to the Rear

The Sleigh has 4 Sides Panels (I). Two Front and 2 Rear. Insert the

connecting rods on each Front Side Panel into the matching holes on the

Rear Side Panels. Insert the connecting rods on the bottom of the Side

Panels (I) into the matching holes on the top of the Runners. Fasten with

Plastic Ties (N).

8. Assembling the Front and Back Panel to the Side Panel

Insert the connecting rods on the bottom of the Front and Back Panel (H)

into the matching holes on the top of the Seat Panel (H). Insert the

connecting rods on the top of the Front and Back Panels into the holes on

the Side Panels (I). Insert the connecting rods on the bottom of the Seat

Panel into Runners. Fasten with Plastic Ties (N).

9. Assembling the Bow to the Reindeer and Sleigh

Insert the wire tie on the Bow (L) through the holes of the material on

Reindeer and Sleigh then twist the wires together to secure.

10 Securing the Reindeer and Sleigh to the Ground

Secure the Reindeer and Sleigh to the ground with the Ground Stakes (M).