Instructions / Assembly

SSEMBLY

1 Assembling the Unicycle and Base Stand

Insert the connecting rod on the bottom of the Wheel (H) into the

connecting rod on the middle of the Base Stand (J) and fasten together

at the connecting loop with Screw & Wingnut Nut (K). Insert the

connecting rod on the bottom of Stool (G) into the connecting holes on

the top of the Wheel (H) and fasten with Screw & Wingnut (K).

2 Assembling the Pedals on the Unicycle

Insert the "L" shaped connecting rods on both Pedals (I) into the

connecting holes on the middle of Wheel (H).

3 Assembling the Body

Align two Halves of Body (E) with each other then insert the connecting

rods on one half into the connecting holes on the half then and fasten

together at the connecting loops with Plastic Ties (M).

4 Securing the Body to the Unicycle

Insert the connecting rods on the side of the Body and the Foot into the

connecting holes of the Unicycle Stool and Pedal then fasten together at

the connecting loops with Plastic Ties (M).

5 Assembling the Head to the Body

Insert the connecting rods on the Head (B) into the connecting holes on

the Body and fasten together at the connecting loops with Plastic Ties

(M). Insert the connecting rod on the Tail (F) into the connecting hole at

the rear of the Body (E) and fasten together at the connecting loop with

Plastic Tie (M).

6 Assembling the Ears to he Head

Insert the connecting rods on both Ears (D) into the connecting holes on

the sides of the Head (B).

7 Assembling the Hat and Tusks to the Head

Insert the connecting rod on the bottom of the Hat (A) into the

connecting hole at the top of Head (B). Insert the connecting rods

on both Tusks (C) into the connecting holes on the front of the Head.

The Elephants Trunk is between the Tusk.

8 Securing the Elephant to the Ground

Secure the Product to the ground with the Ground Stakes (L) by placing

the Ground Stakes over the Metal Frame at four corners then into the

ground.