Instructions / Assembly

HOW TO Shorten Cordless Blinds

1-in. Mini Blinds

2-in. Faux Wood Blinds

2-1/2-in. Faux Wood Blinds

42-in.

64-in.

42-in.

72-in.

42-in.

72-in.

Item

Original Length

of Blinds

Maximum Q’ty of Slats

Can be taken off

Install the

blind in the

brackets,

then lower the blind

fully and rotate the

slats to open position.

Measure the desired

length and make a

mark on the last slat.

The following lists the maximum amount of slats that may be removed .

Removing more than noted will result in failure of your cordless blinds

Open

42”

(Example)

The desired blind length is 42”

Uninstall the blind and pull the blind to about 20” long. Take a regular household

push pin and insert it into one of the spring box holes to lock the spring tension,

keep in place until you complete the last step. Ensure the spring tension is

securely fixed.

[ IMPORTANT NOTICE ] Altering blinds will void warranty

1Whole Space Ind. Ltd.

PAGE 1
HOW TO Shorten Cordless Blinds The following lists the maximum amount of slats that may be removed . Removing more than noted will result in failure of your cordless blinds Item 1-in. Mini Blinds 2-in. Faux Wood Blinds 2-1/2-in. Faux Wood Blinds Original Length of Blinds Maximum Q’ty of Slats Can be taken off 42-in. 64-in. 42-in. 72-in. 42-in. 72-in.
PAGE 2
3 Using a flat head screwdriver, remove the bottom -rail buttons. 4 Carefully cut the slats through the holes (including the marked slat) to remove the slats from the blind.Then cut ONLY the outer ladder string. (Do NOT to cut the inner cord, or the blind will be broken) Leaving two ladders, one to insert the bottom rail and one to tuck inside the hole. Ladder x1 DO NOT CUT Inner Cord 5 With the one empty ladder, twist the ladder string and insert into the bottom-rail hole and replace the buttons.