Tools Required: Measuring tape or ruler Pang! Phillips Head sower driver & Drift Note: 1 mounting sidewall or plaster wall, use the provided plastic screw anchors (Bl. News Quantity a Saar Roller Shade {Single Spring Bracken OE Solar Roller Shade (Double Spring Bracken © Hardware Pack Rome quantity Price Hear Screws © 5 a Se raw Anchors @ Bead Chain.
Installation Instructions IMPORTANT! Remove the shade from the head rail assembly before proceeding. Do nat remove: paper wrap until after installation. Open the left flip mounting bracken by rotating the Turn the dial on the left side of the shade clockwise to lip upward, then remove the shade farm headstall retract the pin, then vernal the shade from headstall assembly. Di riot remove the: pager swap. assembly: Uo riot remove: the: paper wrap, lark the mere .
Installation Instructions (continued) IMPORTANT! iris important the the head rail is installed with the brackets in the proper position The brackets are marked.” (left) and "R” fight). Wake ufc to install the headwaiter with "R16 fight side and “L “to left side. If the Headstall is installed proper; Twill cause the springs totem in the: wright direction and the shade will net operate properly.
ablation Ir Ce an sons (continued) Sle SE SHEW Re Sel Double Spring Bracket Shades Before installing the shale roll, make sung that the end pin is fully ingratiated. Rotate the dial clockwise until-the pins. flush hits he face of the dial.
Echo SE ec Hal th shade mn the middle of the pull bard gently Howl the shade in the middle of the pull Brenda gently pull the shale down Ho the desired position and push theistic ug to Tis desired positioning feasible.