Instructions / Assembly

!
Measuring for Inside Mount Faux Wood Blinds
Measuring for Outside Mount Faux Wood Blinds
IMPORTANT NOTES ABOUT MEASURING:
• Always use a steel tape measure
• Measure Width in three places & use smallest Width
• Measure Height in three places and use tallest Height
• Width always comes first, then Height
•
Step 3: To find width: Measure the
exact distance between the inside
surfaces of the window frame at the top,
middle, and bottom. Write down the
narrowest measurement (round down to
an even 1/2”). Do not make any width
deductions.
Step 4: To find height: Measure the
distance from the inside surface at the
top of the window to the sill at the left,
middle and right. Use the longest height.
If you prefer the blind not to touch the sill,
deduct 1/4". If there is no sill, measure
height to the point where the blind is to
reach. Write down 64” if this distance is
64” or less, otherwise write down 72”.
Step 3: To find width: Measure the
exact distance to the outermost points
where the blind is to be placed. For
optimum light control, this measurement
should extend 3/4" beyond the window
opening on each side (or 1 1/2" for the
entire width).
Step 4: To find height: Measure the
distance from where the top of the blind
will be located to the top of the sill. If
there is no sill or if blind is to overlap
window frame, measure to point blind is
to reach. Write down 64” if this distance
is 64” or less, otherwise write down 72”.