Item #1004298727/ 1004151913 Model #1357FM-33-201 USE AND CARE GUIDE CHARICE 57 IN INFRARED MANTEL ELECTRIC FIREPLACE Questions, problems, missing parts? Before returning to the store, call Home Decorators Collection Customer Service 8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday 1-800-986-3460 HOMEDEPOT.COM/HOMEDECORATORS THANK YOU We appreciate the trust and confidence you have placed in Home Decorators Collection through the purchase of this fireplace console.
Table of Contents Table of Contents. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Safety Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Important Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Warranty. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Pre-Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Planning Installation . . . . . . . .
Safety Information (continued) CAUTION: □□ If possible, ALWAYS unplug this appliance when not in use. □□ DO NOT operate any heater with a damaged cord or plug or after the heater malfunctions. DO NOT operate any heater if it has been dropped or damaged in any manner. Disconnect power at service panel and have heater inspected by a reputable electrician before reusing. □□ Any repairs to this fireplace should be carried out by a qualified service person.
Warranty The manufacturer warrants that your new electric fireplace is free from manufacturing and material defects for a period of one year from date of purchase, subject to the following conditions and limitations. Install and operate this electric fireplace in accordance with the installation and operating instructions furnished with the product at all times. Any unauthorized repair, alteration, willful abuse, accident, or misuse of the product shall nullify this warranty.
Pre-Installation PLANNING INSTALLATION Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product. Estimated Assembly Time: 50 minutes. Tools Required for Assembly (not included): Phillips screwdriver. TOOLS REQUIRED Phillips screwdriver (not included) HARDWARE INCLUDED NOTE: Hardware not shown to actual size.
Pre-Installation (continued) PACKAGE CONTENTS E B A B F D H I G C Part Description Quantity A Top 1 B Outer Wall 2 C Center Panel 1 D Base 1 E Left Front Panel 1 F Right Front Panel 1 G Wood Door Panel 1 H Insert 1 I Remote Control 1 J Battery 2 6 J
Installation 1 Install front panel □□ From behind the assembly, align the holes on left front panel (E) with the corresponding holes on outer wall (B), securing with two washers (BB) and two long bolts (AA). Repeat for right front panel (F). E B BB F AA B BB 2 AA Install right outer wall □□ Insert two wooden dowels (CC) into holes on right outer side of base (D). Place assembly from Step 1 onto base (D), securing with three washers (BB) and three long bolts (AA).
Installation (continued) 3 Install left outer wall □□ Insert two wooden dowels (CC) into holes on the left outer side of base (D). Attach outer wall (B). NOTE: Do not secure the left assembly yet until the center panel (C) is attached at step 5. B CC D B 4 Install center panel □□ Insert one wooden dowel (CC) into each side of center panel (C).
Installation (continued) 5 Install center panel □□ Carefully position the center panel (C) into place between L/R front panels. Secure each side with one washer (BB) and one long bolt (AA), and use three washers (BB) and three long bolts (AA) to secure the left side panel assembly. 1 C B 1 AA BB B 2 AA BB 6 Install top □□ Insert two wooden dowels (CC) into the top outer holes on both outer walls (B). Attach top (A), securing from underneath with seven washers (BB) and seven long bolts (AA).
Installation (continued) 7 Remove insert brackets □□ From behind the assembly, remove the preassembled insert brackets from the opening area. Save brackets and screws for future use. 2 2 1 8 Install insert NOTE: Before proceeding to the next step, with the help of another person, move the mantel close to the final desired location. DO NOT plug insert (H) into power outlet yet. CAUTION: DO NOT slide insert on top of wood to avoid scratching wood surface.
Installation (continued) 9 Re-install insert brackets □□ Re-attach insert brackets with previously removed screws to secure insert (H). Assembly is now complete. With the help of another person, move the assembly to the final desired location. Once in final position, you may plug the insert (H) into the power outlet. H 2 10 Adjust the levelers NOTE: Use the pre-assembled levelers on the base of the fireplace to level the unit.
Change Door Panels (optional) 1 Change door panels NOTE: The pre-installed glass door panels can be switched out with the included wood door panel (G). □□ Remove the silicone trim along the outer edges of the glass panel on the inside of the flip down door. Start at a corner and pull to remove the four pieces. Be careful not to damage the silicone trim, as it will be used to secure the new panel. □□ Remove the glass panel from the door frame, then insert the included wood door panel (G).
Operating Instructions Control Panel Remote Control AAA 1.5V AAA 1.5V To use the remote control, first insert two AAA batteries (included) into the remote control. Ensure the polarities of the batteries match the inside of the battery compartment. NOTE: The control panel is a touch screen. It will appear black. Touch the control panel once to “wake up” the controls. This will cause the controls to light up. Whichever icon you touch will display its last setting when you do this.
Operating Instructions (continued) Increase/Decrease Button NOTE: This option is only available if using the remote control. □□ Press the INCREASE/DECREASE button to adjust the heater’s thermostat setting. □□ Press the INCREASE/DECREASE button again to scroll up through the pre-set temperature settings: The thermostat setting range is 65°F (18°C) to 90ºF (32°C), HI (High). □□ Set the temperature to “HI” to have the heater run continually.
Care and Maintenance □□ Make sure the unit is turned OFF and unplugged, and that the heating elements of heater are cool whenever you are cleaning the heater or fireplace. □□ Clean the metal trim using a water-dampened soft, clean cloth. DO NOT use brass polish or household cleaners as these products will damage the metal trim. □□ The motors used on the fan and the flame generator assembly are pre-lubricated for extended bearing life and require no further lubrication.
Troubleshooting Problem Possible cause The error E1 displays on the control panel. The overheat sensor has been engaged. Solution Unplug unit, wait 15-20 minutes, then the sensor will reset itself. Plug the unit back in and turn on the heater. If the problem persists, call customer service. NOTE: The other functions will work normally excluding the heater. Until the problem is solved, the error will only appear/sound when the heater button is pressed. The error E2 displays on the control panel.
Service Parts MODEL TYPE K A C F H I B E D EE Part Description FF GG Part # Part HH Description Part # A Top 1357FM-33-201-TOP EE KD Hardware Pack B Outer Wall PF-1357FM-33-201OUTER WALL FF Flip-Down Door Hardware Set GG Flip-Down Door Handle C Center Panel HH Leveler E Left Front Panel F Right Front Panel D Base PF-1357FM-33-201-BASE H Insert 3322-FG-BG I Remote Control K Flip-Down Door Center Panels INSERT-BOTTOM-MB II Insert Bracket II PH-1357FM-33-201 PU17-
Questions, problems, missing parts? Before returning to the store, call Home Decorators Collection Customer Service 8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday 1-800-986-3460 HOMEDEPOT.COM/HOMEDECORATORS Retain this manual for future use.
