Manualshelf

Full Product Manual

ManualsBrandsHome Decorators Collection ManualsElectric FireplacesCharice 57 in. Freestanding Infrared Electric Fireplace in White with Carrara Marble Surround
9101112131415161718
13 HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.
Operating Instructions
Control Panel Remote Control
AAA 1.5V
AAA 1.5V
To use the remote control, rst insert two AAA
batteries (included) into the remote control.
Ensure the polarities of the batteries match the
inside of the battery compartment.
NOTE: The control panel is a touch screen. It will appear black. Touch the control panel once to “wake up” the controls. This will cause the
controls to light up. Whichever icon you touch will display its last setting when you do this. At this time you can press the icon that corresponds
with the function you would like to adjust. After 5 seconds the touch screen will fade to black.
M
Power Function
□ Press the POWER icon to turn the main power to the unit ON or OFF.
□ When the unit is powered ON, the lights under the emberbed will glow to indicate the unit has power.
□ If any functions are stored in memory, they will resume at the last setting.
Flame Brightness Function
□ Press the FLAME BRIGHTNESS icon to adjust the ame brightness.
□ If the unit main power is OFF, you can press the FLAME BRIGHTNESS icon to power ON the unit and ame brightness will
resume at the last setting.
□ Press the FLAME BRIGHTNESS icon again to scroll up through the ame brightness settings: 1, 2, 3, 4, 5, OF.
Temperature Function
□ If the unit is powered OFF, you can press the TEMPERATURE icon to power ON the unit. The emberbed will glow at the
lowest brightness setting unless a different setting was saved in the memory.
□ Press and hold the TIMER icon for 5 seconds to toggle between 5°F (3°C) increments and 1ºF (1°C) increments when
setting the temperature. The factory default temperature is 5°F (3°C) increments.
NOTE: This option is only available if using the control panel.
□ Hold down the TEMPERATURE icon for 5 seconds to toggle between Fahrenheit and Celsius. An “F” or “C” will display next
to the temperature.
NOTE: This option is only available if using the control panel.
□ Press and hold the TEMPERATURE icon for 10 seconds to disengage the heater function. Press and hold the
TEMPERATURE icon for 10 seconds again to engage the heater function. (See HEATER OVERRIDE section below for more
details).