Installation Guide

10
I
FF
J
DD
8
7
Assembly (continued)
Insert Wood Dowels (DD) into the bottom edges of
the main assembly as indicated.
Locate the Left Side Panel (I) and the Right Side Panel (J).
Align pre-drilled holes on the edges of each
Side Panel (I, J) with the previously installed cam lock
screws and wood dowels from step 6.
Secure the cam lock screws in the Left Side Panel (I) by
inserting the Cam Lock Connectors (FF) into the pre-drilled
holes as shown.
Tighten with a Phillips screwdriver.
Repeat for the Right Side Panel (J).
Preparing for the bottom assembly
Attaching the side panels
K
II
JJ
L
9
Locate the Base Left Side Rail (K) and Base
Right Side Rail (L).
Insert Bolts (II) through the Two-Hole Plastic
Connector Blocks (JJ) on each rail as shown.
Tighten with the Phillips screwdriver.
Preparing the base panels