005350169/312727253/23MMP90558-PD01 1005210637/312727372/23MMP90558-PG76 1005207107/312727387/23MMP90558-PO98 USE AND CARE GUIDE KERRINGTON ELECTRIC FIREPLACE WITH INTEGRATED CHARGING STATION QUESTIONS, PROBLEMS, MISSING PARTS? BEFORE RETURNING TO THE STORE, CALL HOME DECORATORS COLLECTION CUSTOMER SERVICE 8 A.M. - 7 P.M., EST, MONDAY - FRIDAY, 9 A.M. - 6 P.M., EST, SATURDAY 1-800-986-3460 HOMEDEPOT.
Table of Contents Maximum Load Warning............................................ 2 Safety Information...................................................... 3 Warranty...................................................................... 5 Pre-Assembly.............................................................. 6 Hardware Included ................................................... 6 Product Specifications........................................................ 7 Tools Required.........................
Safety Information Please read and understand this entire manual before attempting to assemble, operate or install the product. If you have any question regarding the product, please call customer service at 1-800-988-7021, 8 a.m.-7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST, Saturday. WARNING: Under no circumstances should this fireplace be modified. Parts that must be removed for servicing must be replaced prior to operating this fireplace again.
Safety Information (continued) NOTE: Use care in assembling your new fireplace. Take your NOTE: To avoid injury from unexpected starting or electrical time and use the hardware provided and a quality Phillips head screwdriver. Never overtighten bolts. • Do not sit on any part of the mantel. • It is recommended to work on a soft surface like a rug or to lay out a blanket to protect the furniture from getting scratched during the assembly process.
Warranty Warranty 1 Year Limited Warranty: The manufacturer warrants that your new Electric Fireplace is free from manufacturing and material defects for a period of one year from date of purchase, subject to the following conditions and limitations. 1. Install and operate this appliance in accordance with the installation and operating instructions furnished with the product at all times. Any unauthorized repair, alteration, willful abuse, accident, or misuse of the product shall nullify this warranty.
Pre-Assembly HARDWARE INCLUDED AA CC BB KK LL WW XX Part DD EE FF MM NN OO PP QQ RR YY ZZ AAA BBB CCC DDD II HH GG SS TT JJ UU VV Description Part Number Quantity Wood Dowel PH-DWLNTL001 41 BB Cam Lock Screw PH-KDBZNC002 25 CC Cam Lock Connector PH-KDCZNC001 25 DD Shelf Pin PH-SPNPCSPLB2 16 EE Handle with Screws HANDLE WITH SCREWS 2 AA FF Screw- 3 x 12 mm PH-SCRBLK007 40 GG Screw- 4 x 16 mm PH-SCRBLK019 14 HH Slider PH-BDGBLK001 2 II Screw- 4
Pre-Assembly (continued) PRODUCT SPECIFICATIONS VOLTAGE 120VAC, 60 Hz AMPS 12.5 Amps WATTS 1500 Watts USB INPUT 5VDC / Max 2.4 Amps USB OUTPUT 5VDC / Max 2.4 Amps PLANNING ASSEMBLY Before beginning assembly of product, make sure all parts are present. Compare parts with Hardware Included and Package Contents lists. If any part is missing or damaged, do not attempt to assemble, install or operate the product. Contact customer service for replacement parts.
Pre-Assembly (continued) PACKAGE CONTENTS NOTE: All panels are labeled left and right as viewed from the front of unit.
Assembly 1 Preparing the front surround panels Locate the Left Surround Rail (Q) and Right Surround Rail (B) and place on a flat surface. Insert Cam Lock Screws (BB) into the pre-drilled holes on both panels as shown and tighten using a Phillips screwdriver. Q BB B 2 Preparing the center panels AA Locate the Left Partition (E) and the Right Partition (F) and place on a flat surface. Insert Wood Dowels (AA) into the pre-drilled holes along the edges as shown.
Assembly (continued) 4 Attaching the door catch Attach the Magnetic Door Catches (OO) to the Left Partition (E) and the Right Partition (F). Secure each Magnetic Door Latch (OO) using Screws (SS) where indicated by the diagram. E SS OO F 5 Preparing the center shelf Locate the Center Shelf (H). Insert Wood Dowels (AA) into the pre-drilled holes along the edges of the Center Shelf (H) as shown.
Assembly (continued) 6 Preparing the top surround rail Locate the Top Surround Rail (R). Insert Cam Lock Screws (BB) into the pre-drilled holes in the Top Surround Rail (R). Tighten using a Phillips screwdriver. BB R 7 Assembling the center shelf CC Align the cam lock screws in the Top Surround Rail (R) with the holes in the Center Shelf (H) as shown. Insert the Cam Lock Connectors (CC) into the pre-drilled holes. Secure using a Phillips screwdriver.
Assembly (continued) 9 Preparing the center assembly Insert Wood Dowels (AA) into the pre-drilled holes along the edges of the center assembly as shown. AA 10 Attaching the bottom shelf 11 Preparing the side panels Locate the Left Side Panel (I) and the Right Side Panel (J). Insert Wood Dowels (AA) into the pre-drilled holes in the edge of the Left Side Panel (I). Repeat for the Right Side Panel (J). Align the Bottom Shelf (A) with the center assembly.
Assembly (continued) 12 Securing the side panels 13 Preparing the base Align the wood dowels in the Left Side Panel (I) with the edge of the bottom shelf. Secure together using Screws (II) and a Phillips screwdriver. Repeat to attach the Right Side Panel (J). Locate the Base Rails (V, S, T, U) and place on a flat surface. Insert Bolts (WW) through the two-hole Plastic Connector Blocks (XX) on each rail as shown. Tighten with the Phillips screwdriver. WW Attach "A" side (long side) on the rail.
Assembly (continued) 16 Attaching the front base panel Align the Front Base Rail (V) with the previously assembled base rails. Secure with Screws (YY) using a Phillips screwdriver. YY V 18 Attaching the decorative base panel 17Attaching the base Locate the Decorative Base Panel (W). Insert Bolts (YY) through the Flat Washers (JJ) to secure the Decorative Base Panel (W). Tighten with a Phillips screwdriver.
Assembly (continued) 19 Securing the surround bracket CCC Find the pre-attached Metal Plate (CCC) behind the surround and rotate the bracket onto the back of the center shelf to span the joint. Secure the metal bracket with a Screw (FF). Repeat to secure both brackets on each side. Insert Wood Dowels (AA) into the pre-drilled holes in the top edge of the main assembly as shown. FF AA 20 Preparing the top apron Locate the Top Front Rail (K) and place it on a flat surface.
Assembly (continued) 21 Attaching the top apron Align the Top Front Rail (K) with the main assembly and slide it down onto the previously installed wood dowels. Secure the plastic connector blocks to the Top Front Rail (K) and main assembly using Screws (GG) and a Phillips screwdriver. GG K 22 Attaching the USB Port TT Slide the USB output (UU) through the opening in the center shelf. Carefully secure the USB output (UU) in place using Screws (TT) and a Phillips screwdriver.
Assembly (continued) 23 Preparing the top of the assembly Insert Wood Dowels (AA) into the pre-drilled holes in the top edges of the main assembly. AA 24 Preparing the top panel for assembly Locate the Top Panel (G) and place onto a flat surface. Insert the Cam Lock Screws (BB) into the pre-drilled holes in the bottom of the Top Assembly (G). Tighten using a Phillips Screwdriver.
Assembly (continued) 26 Assembling the rolling doors 27 Attaching the handles Remove the pre-assembled screws from the Handles (EE), then attach to the Left Roller Door (O). Repeat for the Right Roller Door (P). Locate the Left and Right Rolling Doors (O, P). Place the Rolling Door Hangers (KK) on the outside of the Left Roller Door (O). Insert Bolts (WW) through Flat Washers (JJ) and into the pre-drilled holes on the other side of the door.
Assembly (continued) 29 Attaching the door stopper LL Insert the Bolts (MM) through the roller track to secure the Door Stoppers (LL). Place the Door Bumpers (ZZ) on the inner edge of each door as indicated. Simply pull off the adhesive and stick. MM ZZ 30 Attaching the track guide Insert Screws (GG) through the Sliders (HH) and into the pre-drilled holes into each Roller Door (O, P). O P HH 19 GG HOMEDEPOT.COM/HOMEDECORATORS Please contact 1-800-986-3460 for further assistance.
Assembly (continued) 31 Installing the back panels Insert the Screws (FF) through the pre-drilled holes in the Upper Back Panel (L) and the Side Back Panels (M). Tighten using a Phillips Screwdriver. L FF M M 32 Attaching the adjustable shelves Insert the Shelf Pins (DD) into the pre-drilled holes on the inside of each side cabinet panel as shown. Align all pins to the same height to ensure your shelf is level. Rest the Adjustable Shelf (N) on the Shelf Pins (DD).
Assembly (continued) 33 Attaching the cabinet doors Insert the Right and Left Pin Hinges (PP, QQ). Slide the Left Door (C) into the grooves. Insert Screws (RR) to secure the Left Door (C) into place. Repeat to attach the Right Door (D). PP QQ QQ PP D C RR QQ 34 Preparing the insert brackets Remove the Insert Mounting Brackets (BBB) located on the inside of the surround by unscrewing the mounting screws. BBB 21 HOMEDEPOT.COM/HOMEDECORATORS Please contact 1-800-986-3460 for further assistance.
Assembly (continued) the fireplace insert into 35 Installing the mantel assembly Lift the Fireplace Insert (X) carefully into the back of the unit and center in the fireplace insert opening. Do not drag the fireplace insert across the base as it may scratch your unit. X 36 Securing the fireplace insert Align the Insert Mounting Brackets (BBB) from step 34 and secure with the mounting screws. Repeat for the other sides.
Assembly (continued) 37 Adjusting the levelers In order for the doors on your unit to work properly your unit must be level. Pre-attached levelers (AAA) are located under the base of the media unit. To level your assembled media unit, turn the levelers as needed. AAA 23 HOMEDEPOT.COM/HOMEDECORATORS Please contact 1-800-986-3460 for further assistance.
Assembly (continued) 38 Installing the tipping restraint hardware When the Tipping Restraint Hardware (NN) is properly installed, it can provide protection against unexpected tipping of the Unit due to small tremors, bumps or climbing. Each Tipping Restraint Hardware (NN) includes one Unit Anchor, one Wall Anchor, one Anchor Tether, and four Anchor Screws. Use these to complete the following steps for a proper installation. Locate a secure wall stud behind the unit closest to left side.
Operation Operation NOTE: The control panel can be accessed at the upper-right corner of the insert. 1 Powering the fireplace 2 Push the Power button to supply power to all functions of the fireplace and put the insert in a standby mode. Push the Power button again to turn off all functions.
Operation (continued) 5 Replacing the remote control battery 6 Disposing of used batteries The battery may contain hazardous substances that could endanger the environment and human health. When the remote control stops operating or its range seems reduced, it is time to replace the batteries with new ones. On the back end of the remote, press and slide the battery door open and remove the old battery.
Operation (continued) 8 Patented Safer Plug® information This product is equipped with a Safer Plug®, which is an advanced safety device that helps detect electrical fires caused from faulty outlets. Overloading of outlets, adapters and surge protectors may cause overheating, damage, and increased risk of fires. The Safer Plug continuously monitors the temperature in the plug and outlet and will turn off the heater to prevent unsafe outlet overheating.
FCC/IC Information WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Troubleshooting PROBLEM Fireplace stopped heating before reaching the desired temperature. ROOT CAUSE CORRECTIVE ACTION Fireplace has reached set temperature. Temperature around fireplace might be a few degrees higher than other area in the room. Set Fireplace to a higher temperature or always “on”. Display shows " " The thermostat sensor is broken or disconnected. Unplug the fireplace, remove the back panel of the fireplace and check that the thermostat is plugged into the main circuit board.
Troubleshooting (continued) PROBLEM Flame effect works but heater function does not and the emberbed flashes when the Heater button is pressed. ROOT CAUSE CORRECTIVE ACTION The heater is disabled. With the power on press and hold the POWER button on the control panel for 10 seconds. Once re-enabled the emberbed lights will flash multiple times. There are no batteries. Change the remote batteries. The signal is poor. Operate remote transmitter at a slow measured pace.
Replacement Parts For replacement parts, call our customer service department at 1-800-986-3460, 8 a.m.-7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST, Saturday. Part Description 1 2 3 4 5 6 7 8 9 10 11 Qty.
Questions, problems, missing parts? Before returning to the store, call Home Decorators Collection Customer Service 8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m.- 6 p.m., EST, Saturday 1-800-986-3460 HOMEDEPOT.COM/HOMEDECORATORS Retain this manual for future use.